上海大学学报(自然科学版) ›› 2021, Vol. 27 ›› Issue (6): 993-1009.doi: 10.12066/j.issn.1007-2861.2349
• 特邀综述 • 下一篇
严佳1, 柴军生2, 任国哲2, 吴忱韩1, 唐小龙1(), 杨小权1, 丁珏1, 翁培奋2
收稿日期:
2021-11-17
出版日期:
2021-12-31
发布日期:
2022-01-06
通讯作者:
唐小龙
E-mail:tangxl@shu.edu.cn
作者简介:
唐小龙(1988—), 男, 博士. 研究方向为计算流体力学、计算气动声学、航空发动机流场仿真软件开发. E-mail: tangxl@shu.edu.cn基金资助:
YAN Jia1, CHAI Junsheng2, REN Guozhe2, WU Chenhan1, TANG Xiaolong1(), YANG Xiaoquan1, DING Jue1, WENG Peifen2
Received:
2021-11-17
Online:
2021-12-31
Published:
2022-01-06
Contact:
TANG Xiaolong
E-mail:tangxl@shu.edu.cn
摘要:
发展可靠、高效、低噪声的发动机是航空工业不懈的追求. 涡轮作为航空发动机核心部件之一. 其流动及换热问题始终是贯穿航空发动机设计、制造的核心问题. 随着航空发动机风扇和喷流噪声得到大幅控制, 涡轮噪声逐渐凸显. 并日益受到关注. 为推动航空发动机涡轮流动换热及噪声数值模拟方法的工程应用, 首先. 以航空发动机涡轮中复杂湍流及流动换热问题为主线. 分别阐述了旋转盘腔、旋转叶片流动及换热问题数值模拟的研究现状; 其次. 对航空发动机涡轮噪声研究现状进行分析. 总结了常用涡轮噪声预测方法和存在的问题. 在此基础上. 面向工程实际需求. 对航空发动机涡轮流动、换热与噪声数值模拟进行了展望.
中图分类号:
严佳, 柴军生, 任国哲, 吴忱韩, 唐小龙, 杨小权, 丁珏, 翁培奋. 航空发动机涡轮流动及噪声数值模拟[J]. 上海大学学报(自然科学版), 2021, 27(6): 993-1009.
YAN Jia, CHAI Junsheng, REN Guozhe, WU Chenhan, TANG Xiaolong, YANG Xiaoquan, DING Jue, WENG Peifen. Numerical simulations of aero-engine turbine flow and noise[J]. Journal of Shanghai University(Natural Science Edition), 2021, 27(6): 993-1009.
[1] |
Kármán T V. Über laminare und turbulente reibung[J]. ZAMM-Journal of Applied Mathematics and Mechanics, 1921, 1(4): 233-252.
doi: 10.1002/zamm.v1:4 |
[2] | Cochran W. The flow due to a rotating disc[C]// Mathematical Proceedings of the Cambridge Philosophical Society. 1934: 365-375. |
[3] |
Daily J W, Nece R E. Chamber dimension effects on induced flow and frictional resistance of enclosed rotating disks[J]. Journal of Basic Engineering, 1960, 82(1): 217-230.
doi: 10.1115/1.3662532 |
[4] | Sambo A S. Numerical computation of laminar flows in rotor-stator cavities[C]// Numerical Methods in Laminar and Turbulent Flow. 1985: 274-286. |
[5] |
Long C A, Tucker P G. Shroud heat transfer measurements from a rotating cavity with an axial throughflow of air[J]. Journal of Turbomachinery, 1994, 116(3): 525-534.
doi: 10.1115/1.2929441 |
[6] |
Koosinlin M L, Launder B E, Sharma B I. Prediction of momentum, heat and mass transfer in swirling, turbulent boundary layers[J]. Journal of Heat Transfer, 1974, 96(2): 204-209.
doi: 10.1115/1.3450165 |
[7] |
Lapworth B L, Chew J W. A numerical study of the influence of disc geometry on the flow and heat transfer in a rotating cavity[J]. Journal of Turbomachinery, 1990, 114(1): 256-263.
doi: 10.1115/1.2927993 |
[8] | 孟伟, 徐国强, 罗翔, 等. 高位进气转静系旋转盘流动与换热的数值模拟[J]. 热科学与技术, 2006(1): 32-37. |
Meng W, Xu G Q, Luo X, et al. Numerical simulation of fluid flow and heat transfer in shrouded rotating disk with high positioned axial inlet[J]. Journal of Thermal Science and Technology, 2006(1): 32-37. | |
[9] | 王美丽, 周彬, 刘松龄. 涡轮盘腔内流动和传热的数值模拟[J]. 航空动力学报, 1995(4): 68-71. |
Wang M L, ZHOU B, Liu S L. Numerical simulation of flow and heat transfer in turbine disc cavity[J]. Journal of Aerospace Power, 1995(4): 68-71. | |
[10] | Chew J. Prediction of flow in rotating disc systems using the $k$-$\varepsilon$ turbulence model[C]// SME International Gas Turbine Conference and Exhibit. 1984. |
[11] |
Morse A. Numerical prediction of turbulent flow in rotating cavities[J]. Journal of Turbomachinery, 1988, 110(2): 202-212.
doi: 10.1115/1.3262181 |
[12] |
Iacovides H, Theofanopoulos I P. turbulence modeling of axisymmetric flow inside rotating cavities[J]. International Journal of Heat and Fluid Flow, 1991, 12(1): 2-11.
doi: 10.1016/0142-727X(91)90002-D |
[13] | 张靖周, 吉洪湖, 王锁芳. 具有径向进出流的转-静盘腔流动与换热的数值研究[J]. 工程热物理学报, 2001(增刊 1): 137-140. |
Zhang J Z, Ji H H, Wang S F. Numerical study for turbulent flow and heat transfer inside rotor-stator disc cavity with radial outflow[J]. Journal of Engineering Thermophysics, 2001(Suppl. 1): 137-140. | |
[14] | 白洛林, 冯青, 刘松龄. 湍流参数对复杂形状涡轮盘腔流场的数值研究[J]. 推进技术, 2003(4): 344-347. |
Bai L L, Feng Q, Liu S L. Numerical investigation of turbulence parameter on flow field of rotating disc cavity with complex geometry[J]. Journal of Propulsion Technology, 2003(4): 344-347. | |
[15] | 白洛林, 冯青, 刘松龄, 等. 预旋进气的盘腔系统内流场的数值研究[J]. 推进技术, 2003(2): 135-138. |
Bai L L, Feng Q, Liu S L, et al. Numerical investigation on preswirl flow in rotating disc system[J]. Jourmal of Propulsion Technolology, 2003(2): 135-138. | |
[16] | 张晶辉, 张振扬. 涡轮盘腔径向封严流动的非定常数值研究[J]. 兵器装备工程学报, 2021, 42(9): 100-105. |
Zhang J H, Zhang Z Y. Unsteady numerical investigation of radial rim seal flow in a turbine cavity[J]. Journal of Ordnance Equipment Engineering, 2021, 42(9): 100-105. | |
[17] | 丁水汀, 邓长春, 邱天. 中心进气旋转盘腔换热特性对无量纲参数的敏感性分析[J]. 航空学报, 2019, 40(12): 23-31. |
Ding S T, Deng C C, Qiu T. Sensibility analysis of heat transfer characteristics to dimensionless criterion in central inlet rotating disk cavity[J]. Acta Aeronautica et Astronautica Sinica. 2019, 40(12): 23-31. | |
[18] |
Liao G, Wang X, Li J. Numerical investigation of the pre-swirl rotor-stator system of the first stage in gas turbine[J]. Applied Thermal Engineering, 2014, 73(1): 940-952.
doi: 10.1016/j.applthermaleng.2014.08.054 |
[19] | Andersson H I, Lygren M. LES of open rotor-stator flow[J]. International Journal of Heat & Fluid Flow, 2006, 27(4): 551-557. |
[20] | Gao F, Chew J W, Beard P F, et al. Large-eddy simulation of unsteady turbine rim sealing flows[J]. International Journal of Heat & Fluid Flow, 2018, 70:160-170. |
[21] | Tuliszka-Sznitko E, Zielinski A, Majchrowski W. LES of the non-isothermal transitional flow in rotating cavity[J]. International Journal of Heat & Fluid Flow, 2009, 30(3): 534-548. |
[22] |
Tuliszka-sznitko E, Majchrowski W, Kieczewski K. Investigation of transitional and turbulent heat and momentum transport in a rotating cavity[J]. International Journal of Heat and Fluid Flow, 2012, 35:52-60.
doi: 10.1016/j.ijheatfluidflow.2012.02.002 |
[23] | Lygren M, Andersson H I. Large eddy simulations of the turbulent flow between a rotating and a stationary disk[J]. Zeitschrift Für Angewandte Mathematik Und Physik Zamp, 2004, 55(2): 268-281. |
[24] |
Randriamampianina A, Poncet S. Turbulence characteristics of the bdewadt layer in a large enclosed rotor-stator system[J]. Physics of Fluids, 2006, 18(5): 055104.
doi: 10.1063/1.2204049 |
[25] |
Serre E, Bontoux P, Launder B E. Direct numerical simulation of transitional turbulent flow in a closed rotor-stator cavity[J]. Flow Turbulence and Combustion, 2002, 69(1): 35-50.
doi: 10.1023/A:1022467232348 |
[26] |
Boyle R J. Navier-Stokes analysis of turbine blade heat transfer[J]. Journal of Turbomachinery, 1990, 113(3): 392-403.
doi: 10.1115/1.2927888 |
[27] |
Boyle R J, Giel P W. Three-dimensional Navier-Stokes heat transfer predictions for turbine blade rows[J]. Journal of Propulsion and Power, 1995, 11(6): 1179-1186.
doi: 10.2514/3.23957 |
[28] |
Boyle R J, Ameri A A. Grid orthogonality effects on predicted turbine midspan heat transfer and performance[J]. Journal of Turbomachinery, 1994, 119(1): 31-38.
doi: 10.1115/1.2841008 |
[29] |
Ameri A A, Arnone A. Transition modeling effects on turbine rotor blade heat transfer predictions[J]. Journal of Turbomachinery, 1994, 118(2): 307-313.
doi: 10.1115/1.2836641 |
[30] | Tutar M, Sonmez U. The computational modeling of transitional flow through a transonic linear turbine: comparative performance of various turbulence models[J]. Numerical Heat Transfer Applications, 2010, 58(5): 403-427. |
[31] | Bhaskaran R, Lele S K. Large eddy simulation of free-stream turbulence effects on heat transfer to a high-pressure turbine cascade[J]. Journal of Turbulence, 2010, 11(6): 1-15. |
[32] | 王鹏, 邹正平, 刘斌, 等. 雷诺数对涡轮叶片换热影响的研究[J]. 工程力学, 2012, 29(9): 349-358. |
Wang P, Zou Z P, Liu B, et al. Comparative analysis of turbine blade surface heat transfer at different reynolds numbers[J]. Engineering Mechanics, 2012, 29(9): 349-358. | |
[33] | 李虹杨, 郑赟. 粗糙度对涡轮叶片流动转捩及传热特性的影响[J]. 北京航空航天大学学报, 2016, 42(10): 2038-2047. |
Li H Y, Zheng Y. Effect of surface roughness on flow transition and heat transfer of turbine blade[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(10): 2038-2047. | |
[34] | 江立军, 曹俊, 陶焰明, 等. 燃烧室涡轮交互作用尺度自适应模拟[J]. 航空动力学报, 2021, 36(10): 2186-2196. |
Jiang L J, Cao J, Tao Y M, et al. Combustor turbine interaction based on scale adaptive simulation[J]. Journal of Aerospace Power, 2021, 36(10): 2186-2196. | |
[35] | 张国花, 谢公南, Sunden B, 等. 截断肋排布方式对内冷通道换热性能的影响[J]. 南京航空航天大学学报, 2021, 53(4): 504-512. |
Zhang G H, Xie G N, Sunden B, et al. Effects of arrangements of truncated ribs on heat transfer performance in internal cooling channel[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2021, 53(4): 504-512. | |
[36] | McGovern K T, Leylek J. A detailed analysis of film-cooling physics: Part II-compound-angle injection with cylindrical holes[C]// ASME International Gas Turbine and Aeroengine Congress and Exhibition. 1997. |
[37] | Garg V K. Adiabatic effectiveness and heat transfer coefficient on a film-cooled rotating blade[J]. Numerical Heat Transfer, 1997, 32(8): 811-830. |
[38] | Voigt S, Noll B, Aigner M. Aerodynamic comparison and validation of rans, urans and sas simulations of flat plate film-cooling[C]// Asme Turbo Expo: Power for Land, Sea & Air. 2010. |
[39] | Takahashi T, Funazaki K I, Saileh H B, et al. Assessment of URANS and DES for prediction of leading edge film cooling[J]. Journal of Turbomachinery, 2011, 134(3): 1387-1399. |
[40] | 姚玉, 张靖周, 何飞, 等. 涡轮叶片吸力面上收敛缝形孔气膜冷却效率的数值研究[J]. 航空学报, 2010, 31(6): 1115-1120. |
Yao Y, Zhang J Z, He F, et al. Numerical investigation on film cooling effectiveness of converging slot hole at turbine blade suction surface[J]. Acta Aeronautica Et Astronautica Sinica, 2010, 31(6): 1115-1120. | |
[41] | 杨蓓洁, 谭晓茗, 单勇, 等. 肋条结构对气膜冷却凹槽叶尖流动换热的影响[J]. 航空动力学报, 2021, 36(7): 1462-1471. |
Yang B J, Tan X M, Shan Y, et al. Effects of rib structure on flow and heat transfer characteristics of film cooling rotor blade with squealer tip[J]. Journal of Aerospace Power, 2021, 36(7): 1462-1471. | |
[42] | 孟通, 朱惠人, 刘存良, 等. 气膜孔内流动结构对冷却效率的影响[J]. 工程热物理学报, 2019, 40(12): 2904-2911. |
Meng T, Zhu H R, Liu C L, et al. Influence of vortex within film cooling hole on film cooling efficiency[J]. Journal of Engineering Thermophysics, 2019, 40(12): 2904-2911. | |
[43] |
Wang H, Tao Z, Zhou Z, et al. A study for the film cooling performance on the turbine blade suction side tip region under rotating conditions[J]. International Journal of Heat and Mass Transfer, 2019, 138:483-495.
doi: 10.1016/j.ijheatmasstransfer.2019.03.110 |
[44] | 刘言明, 李东明, 牛夕莹, 等. 基于逆向工程的涡轮冷却叶片三维建模及数值模拟[J]. 热能动力工程, 2021, 36(6): 57-62. |
Liu Y M, Li D M, Niu X Y, et al. Three-dimensional modeling and numerical simulation of turbine cooling blades based on reverse engineering[J]. Journal of Engineering for Thermal Energy and Power, 2021, 36(6): 57-62. | |
[45] |
Hultgren L S. Editorial: emerging importance of turbine noise[J]. International Journal of Aeroacoustics, 2010, 10(1): 1-4.
doi: 10.1260/1475-472X.10.1.1 |
[46] |
Nesbitt E. Towards a quieter low pressure turbine: design characteristics and prediction needs[J]. International Journal of Aeroacoustics, 2010, 10(1): 1-15.
doi: 10.1260/1475-472X.10.1.1 |
[47] | Mathews D, Nagel R, Kester J. Review of theory and methods for turbine noise prediction[C]// 2nd Aeroacoustics Conference. 1975. |
[48] | Kazin S, Matta R. Turbine noise generation, reduction and prediction[C]// 2nd Aeroacoustics Conference. 1975. |
[49] | Pickett G. Core engine noise due to temperature fluctuations convecting throughturbine blade rows[C]// Aeroacoustics Conference. 2013. |
[50] | Tyler J M, Sofrin T G. Axial flow compressor noise studies [R]. SAE Technical Paper, 1962: 620532. |
[51] | Kaji S, Okazaki T. Generation of sound by rotor-stator Interaction[J]. Journal of Sound & Vibration, 1970, 13(3): 281-307. |
[52] |
Sears W R. Some aspects of non-stationary airfoil theory and its practical application[J]. Journal of the Aeronautical Sciences, 1941, 8(3): 104-108.
doi: 10.2514/8.10655 |
[53] | Cumpsty N A, Marble F E. The interaction of entropy fluctuations with turbine blade rows: a mechanism of turbojet engine noise[J]. Proceedings of the Royal Society A: Mathematical, 1977, 357(1690): 323-344. |
[54] | Duran I, Moreau S. Study of the attenuation of waves propagating through fixed and rotating turbine blades[C]// 18th AIAA/CEAS Aeroacoustics Conference. 2012: 2133. |
[55] | Doyle V, Matta R. Attenuation of upstream-generated low frequency noise by gas turbines[R]. NASA Report, 1977: CR-135219. |
[56] | Redonnet S. Aircraft noise prediction via aeroacoustic hybrid methods-development and application of onera tools over the last decade: some examples [R]. Aerospace Lab, Alain Appriou, 2014: 1-16. |
[57] | Atkins H, Atkins H. Continued development of the discontinuous galerkin method for computational aeroacoustic applications[C]// 3rd AIAA/CEAS Aeroacoustics Conference. 1997: 1581. |
[58] |
Ewert R, Schrder W. Acoustic perturbation equations based on flow decomposition via source filtering[J]. Journal of Computational Physics, 2003, 188(2): 365-398.
doi: 10.1016/S0021-9991(03)00168-2 |
[59] | Ewert R. CAA slat noise studies applying stochastic sound sources based on solenoidal digital filters[C]// 11th AIAA/CEAS Aeroacoustics Conference. 2005: 2862. |
[60] | Ewert R. Slat noise trend predictions using caa with stochastic sound sources from a random particle mesh method (RPM)[C]// 12th AIAA/CEAS Aeroacoustics Conference. 2006: 2667. |
[61] | Farassat F, Myers M K. Extension of kirchhoff's formula to radiation from moving surfaces[J]. Journal of Sound & Vibration, 1987, 123(3): 451-460. |
[62] | Kahl G, Klose A. Computation of time linearized transonic flow in oscillating cascades[C]// Turbo Expo: Power for Land, Sea, and Air: American Society of Mechanical Engineers. 1993: 93-GT-269. |
[63] | Kennepohl F, Kahl G, Heinig K. Turbine blade/vane interaction noise-calculation with a 3D time-linearised euler method[C]// 7th AIAA/CEAS Aeroacoustics Conference and Exhibit. 2001: 2152. |
[64] | Broszat D, Korte D, Tapken U, et al. Validation of turbine noise prediction tools with acoustic rig measurements[C]// 15th AIAA/CEAS Aeroacoustics Conference. 2009: 3283. |
[65] |
Korte D, Hüttl T, Kennepohl F, et al. Numerical simulation of multistage turbine sound generation and propagation[J]. Aerospace Science and Technology, 2005, 9(2): 125-134.
doi: 10.1016/j.ast.2004.12.002 |
[66] | Vanzante D, Envia E. A numerical investigation of turbine noise source hierarchy and its acoustic transmission characteristics [R]. NASA Report. 2008: 16786. |
[67] | Wang G, Moreau S, Duchaine F, et al. Large eddy simulations of the MT1 high-pressure turbine using turboAVBP[C]// Proceeding of 21st Annual Conference of the CFD Society of Canada. 2013: 70-106. |
[68] | Papadogiannis D, Wang G, Duchaine F, et al. Large eddy simulation of a high pressure turbine stage: effects of sub-grid scale modeling and mesh resolution[C]// Turbo Expo: Power for Land, Sea, and Air: American Society of Mechanical Engineers. 2014. |
[69] |
Papadogiannis D, Wang G, Stéphane M, et al. Assessment of the indirect combustion noise generated in a transonic high-pressure turbine stage[J]. Journal of Engineering for Gas Turbines and Power, 2016, 138(4): 041503.
doi: 10.1115/1.4031404 |
[70] |
Wang G, Sanjose M, Stéphane M, et al. Noise mechanisms in a transonic high-pressure turbine stage[J]. International Journal of Aeroacoustics, 2016, 15(1): 144-161.
doi: 10.1177/1475472X16630870 |
[1] | 连景杰, 郭加宏, 雷作胜. 高频调幅交变电磁场金属液滴悬浮振荡的 3 维数值模拟[J]. 上海大学学报(自然科学版), 2021, 27(5): 879-890. |
[2] | 施美华, 董李, 袁经超, 张树祥, 邵勤思, 颜蔚, 李江, 李爱军, 张久俊. 铅酸电池多物理场建模与数值模拟[J]. 上海大学学报(自然科学版), 2021, 27(3): 444-453. |
[3] | 邓放, 韩桂来, 刘美宽, 丁珏, 翁培奋, 姜宗林. 不同飞行高度下超声速来流/射流及其相互作用的数值模拟[J]. 上海大学学报(自然科学版), 2021, 27(2): 307-324. |
[4] | 高俊丽, 徐宏飞, 袁川, 曹威. 不同温度环境下加肋土工膜与砂土界面拉拔试验的颗粒流数值模拟[J]. 上海大学学报(自然科学版), 2021, 27(2): 336-346. |
[5] | 赵慧玲, 王振江. 预应力工字型围护桩接头的抗剪性能[J]. 上海大学学报(自然科学版), 2020, 26(4): 640-650. |
[6] | 狄勤丰, 王楠, 陈锋, 王文昌, 牛新明, 张金成. 油井管螺纹接头力学特性的研究进展[J]. 上海大学学报(自然科学版), 2020, 26(2): 163-180. |
[7] | 陈博, 何幼桦. 缺失数据下滑动平均模型的估计方法[J]. 上海大学学报(自然科学版), 2020, 26(2): 181-188. |
[8] | 刘迪, 肖依, 江旭伟, 李红, 俞鸣明, 任慕苏, 孙晋良. SiC/UHMWPE 复合装甲板抗侵彻性能的试验与数值模拟[J]. 上海大学学报(自然科学版), 2020, 26(2): 234-243. |
[9] | 顾婕, 张孟喜. 基于强度折减理论的加筋土边坡稳定性分析[J]. 上海大学学报(自然科学版), 2019, 25(6): 990-1002. |
[10] | 郝军利, 赵静, 仲红刚, 徐智帅, 李仁兴, 翟启杰. PMO作用下连铸二冷区电磁场-流场-温度场的数值模拟[J]. 上海大学学报(自然科学版), 2018, 24(3): 412-421. |
[11] | 朱宏达, 雷作胜, 郭加宏. 高频调幅交变电磁场中金属液滴悬浮振荡特性的数值模拟分析[J]. 上海大学学报(自然科学版), 2018, 24(2): 249-256. |
[12] | 张亚辉1, 张孟喜1, 陈强2, 王东2, 罗康军2. 典型松散体边坡滚石运动距离的运动学分析[J]. 上海大学学报(自然科学版), 2017, 23(6): 949-. |
[13] | 李航, 陆烨, 孙康. 标准砂直剪试验的PFC 数值模拟[J]. 上海大学学报(自然科学版), 2017, 23(5): 780-788. |
[14] | 张曙梅1, 徐向荣1, 徐浩2, 周涛1, 李双1, 李妍1. 基于多元相场理论的细菌生物膜生长动力学建模及其数值模拟[J]. 上海大学学报(自然科学版), 2017, 23(4): 563-574. |
[15] | 梁成鹏, 陈红勋, 钱涛. 双流体模型在高浓度含沙水流模拟中的应用[J]. 上海大学学报(自然科学版), 2016, 22(6): 753-762. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||