基于特征工程和机器学习的铝基高熵合金稳定性预测

doi:10.12066/j.issn.1007-2861.2381

Abstract

Abstract:

Aluminum matrix composites offer many excellent properties and wide application prospects. High entropy alloys with a simple and stable phase can be used as reinforcement to prepare aluminum matrix composites with significantly improved performance in all aspects. Herein, a new method based on feature engineering and machine learning is proposed to investigate the phase stability of high entropy alloys. This method uses feature engineering to determine the important factors affecting the target attributes, and then selects the corresponding regression method to predict the phase stability. A model on 50% of the datasets is trained and then the model is verified on other datasets. The results show that this method is highly accurate in predicting the phase stability of high entropy alloys ($R^2=0.994$). In addition, this method can be used to identify key factors affecting phase stability.

Key words: aluminum matrix composite, high entropy alloy, feature engineering, machine learning, phase stability prediction

CLC Number:

TB 331

HU Rui, LIU Qing, ZHANG Guangjie, LI Junjie, CHEN Xiaoyu, WEI Xiao, DAI Dongbo. Phase stability prediction of hign entropy alloys in aluminum matrix composites based on feature engneering and machine learning[J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(3): 476-484.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: https://www.journal.shu.edu.cn/EN/10.12066/j.issn.1007-2861.2381

https://www.journal.shu.edu.cn/EN/Y2022/V28/I3/476

Figures/Tables 8

Fig.1

Table 1

Fig.2

Table 2

Fig.3

Fig.4

Fig.5

Fig.6

References 30

[1]	Zhang Y, Zuo T T, Tang Z, et al. Microstructures and properties of high-entropy alloys[J]. Progress in Materials Science, 2014, 61: 1-93. doi: 10.1016/j.pmatsci.2013.10.001
[2]	Liu Y, Chen J, Li Z, et al. Formation of transition layer and its effect on mechanical properties of AlCoCrFeNi high-entropy alloy/Al composites[J]. J Alloys Compd, 2019, 780: 558-564. doi: 10.1016/j.jallcom.2018.11.364
[3]	Zhu D Z, Ding X, Qi L F, et al. Microstructure and mechanical properties of Al$_{0.25}$Cu$_{0.75}$ FeNiCo HEAs particulates reinforced aluminum alloy[J]. Rare Matel Materials and Engineering, 2017, 46(11): 3400-3404.
[4]	Zhang L S, Ma G L, Fu L C, et al. Recent progress in high-entropy alloys[J]. Advanced Materials Research, 2013, 631: 227-232.
[5]	Gurao N P, Biswas K. In the quest of single phase multi-component multiprincipal high entropy alloys[J]. J Alloys Compd, 2017, 697: 434-442. doi: 10.1016/j.jallcom.2016.11.383
[6]	Yang X, Zhang Y. Prediction of high-entropy stabilized solid-solution in multi-component alloys[J]. Materials Chemistry & Physics, 2012, 132(2/3): 233-238.
[7]	Wang Z, Guo S, Liu C T. Phase selection in high-entropy alloys: from nonequilibrium to equilibrium[J]. JOM, 2014, 66(10): 1966-1972. doi: 10.1007/s11837-014-0953-8
[8]	Yeh J W, Chen S K, Lin S J, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes[J]. Advanced Engineering Materials, 2004, 6(5): 299-303. doi: 10.1002/adem.200300567
[9]	Raghavan R, Kumar H K C, Murty B S, et al. Analysis of phase formation in multi-component alloys[J]. J Alloys Compd, 2012, 544(32): 152-158. doi: 10.1016/j.jallcom.2012.07.105
[10]	Jiang C, Uberuaga B P. Efficient Ab initio modeling of random multicomponent alloys[J]. Physical Review Letters, 2016, 116(10): 105501. doi: 10.1103/PhysRevLett.116.105501
[11]	黎威, 龙连春, 刘静毅, 等. 基于机器学习的无机磁性材料磁性基态分类与磁矩预测[J]. 物理学报, 2022, 71(6): 060202.
[12]	Chang X J, Zeng M Q, Liu K L, et al. Phase engineering of high-entropy alloys[J]. Advanced Materials, 2020, 32: 1907226-1907238. doi: 10.1002/adma.201907226
[13]	Butler K T, Davies D W, Cartwright H, et al. Machine learning for molecular and materials science[J]. Nature, 2018, 559(7715): 547-555. doi: 10.1038/s41586-018-0337-2
[14]	Mohammadi P, Wang Z J. Machine learning for quality prediction in abrasion-resistant material manufacturing process[C]// Electrical & Computer Engineering. 2016.
[15]	Li S, Zhang H, Dai D, et al. Study on the factors affecting solid solubility in binary alloys: an exploration by machine learning[J]. J Alloys Compd, 2019, 782: 110-118. doi: 10.1016/j.jallcom.2018.12.136
[16]	宿彦京, 付华栋, 白洋, 等. 中国材料基因工程研究进展[J]. 金属学报, 2020, 56(10): 1313-1323.
[17]	谢建新, 宿彦京, 薛德祯, 等. 机器学习在材料研发中的应用[J]. 金属学报, 2021, 57(11): 1343-1361. doi: 10.11900/0412.1961.2021.00357
[18]	Tan Y, Li J, Tang S, et al. Design of high-entropy alloys with a single solid-solution phase: average properties vs. their variances[J]. J Alloys Compd, 2018, 742: 430-441. doi: 10.1016/j.jallcom.2018.01.252
[19]	Wolpert D H, Macready W G. No free lunch theorems for optimization[J]. IEEE Transactions on Evolutionary Computation, 1997, 1(1): 67-82. doi: 10.1109/4235.585893
[20]	Pilania G, Balacgabdran P V, Kim C, et al. Finding new perovskite halides via machine learning[EB/OL]. [2022-01-05]. https://www.frontiersin.org/articles/10.3389/fmats.2016.00019/full.
[21]	Mangal A, Holm E A. A Comparative study of feature selection methods for stress hotspot classification in materials[J]. Integrating Materials & Manufacturing Innovation, 2018, 8: 1-9.
[22]	Tang H S, Yao Y W. Research on decision tree in data mining[J]. Application Research of Computers, 2001, 8: 18-19.
[23]	Yao D J, Yang J, Zhan X J. Feature selection algorithm based on random forest[J]. Journal of Jilin University, 2014, 1: 142-146.
[24]	Marsin S M, Ling S L, Zalilah N, et al. Comparison of signal-to-noise, blank determination, and linear regression methods for the estimation of detection and quantification limits for volatile organic compounds by gas chromatography[EB/OL]. [2022-01-11]. https://xueshu.baidu.com/usercenter/paper/show?paperid=6d31c0611b24694ee820ad145e037e77.
[25]	Xu M, Powers D A. Bayesian ridge estimation of age-period-cohort models[M]. Switzerland: Springer International Publishing, 2016.
[26]	Ye Y F, Wang Q, Lu J, et al. Design of high entropy alloys: a single-parameter thermodynamic rule[J]. Scr Mater, 2015, 104: 53-55. doi: 10.1016/j.scriptamat.2015.03.023
[27]	Ye Y F, Wang Q, Lu J, et al. High-entropy alloy: challenges and prospects[J]. Materials Today, 2016, 19(6): 349-362. doi: 10.1016/j.mattod.2015.11.026
[28]	Zhang H R, Zhang Y, Dai D B, et al. Modelling and optimization of the superconducting transition temperature[J]. Materials & Design, 2016, 92: 371-377.
[29]	Tan Y, Li J, Tang Z, et al. Design of high-entropy alloys with a single solid-solution phase: average properties vs. their variances[J]. J Alloys Compd, 2018, 742: 430-441. doi: 10.1016/j.jallcom.2018.01.252
[30]	Luan H W, Yang S, Li J F, et al. Phase stabilities of high entropy alloys[J]. Scripta Materialia, 2020, 179: 40-44. doi: 10.1016/j.scriptamat.2019.12.041

Phase stability prediction of hign entropy alloys in aluminum matrix composites based on feature engneering and machine learning

RichHTML

PDF

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 8

References 30

Related Articles 12

Recommended Articles

Metrics

Comments

[1]	XU Hao, SHI Chenxin, HE Wenfu, ZHAO Huiling, ZHAN Haonan. Site vibration response and attenuation prediction models under tra–c load [J]. Journal of Shanghai University（Natural Science Edition）, 2025, 31(6): 1007-1022.
[2]	WANG Weiguan, DING Jing, LIU Xin. Non-parametric option hedging: evidence derived from SSE 50 ETF options [J]. Journal of Shanghai University（Natural Science Edition）, 2024, 30(6): 1067-1079.
[3]	ZHAO Haoran1 , SHEN Qiang2 , WANG Peng2. Development and application of classical and machine learning interatomic potential [J]. Journal of Shanghai University（Natural Science Edition）, 2024, 30(5): 802-812.
[4]	ZONG Yuyang , LI Junhui , ZHU Xiangdong , SHAN Guangcun , MA Ruguang . Advances on machine learning used for high-entropy electrocatalysts [J]. Journal of Shanghai University（Natural Science Edition）, 2023, 29(5): 859-885.
[5]	ZHANG Han, CHEN Longlong, ZHANG Jianhua, JIANG Haizhen. Structural design and performance prediction of transparent polyimides with high thermal stability [J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(5): 794-812.
[6]	CHEN Shuizhou, WANG Xiaoshu, OUYANG Qiubao, ZHANG Rui. Data-driven based properties prediction and reverse design of aluminum matrix composites [J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(3): 512-522.
[7]	WU Xing, HU Mingtao, DING Peng. Multi-modal data representation learning for ceramic coating materials [J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(3): 492-503.
[8]	MAI Jiaqi, XU Pengcheng, DING Song, SUN Yangting, LU Wencong. Prediction of pitting potential for stainless steel by support vector regression [J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(3): 485-491.
[9]	YUE Xichao, FENG Yan, LIU Jian, YU Yeyong, XI Kangjie, QIAN Quan. Database for materials genome engineering [J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(3): 399-412.
[10]	TAO Li, ZHU Jiejiang, CAI Honghao. Classic machine learning for image recognition in wall column construction drawings [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(5): 940-949.
[11]	LI Yihang, XIAO Bin, TANG Yuchao, LIU Fu, WANG Xiaomeng, LIU Yi. First-principles computation and machine learning of the energies and structures of spinel oxides [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(4): 635-649.
[12]	YOU Yang, DU Wan, LI Weiju, CHEN Jingzhe. Two-dimensional material band gap prediction based on machine learning method [J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(5): 824-833.