上海大学学报(自然科学版) ›› 2020, Vol. 26 ›› Issue (4): 527-537.doi: 10.12066/j.issn.1007-2861.2079

• 研究论文 • 上一篇    下一篇

高灰阶硅基 OLED 微显示器的递归扫描算法

沈文心1, 冉峰1(), 郭爱英2, 沈华明3   

  1. 1.上海大学 微电子研究与开发中心,上海 200444
    2.上海大学 新型显示技术及应用集成教育部重点实验室,上海 200444
    3.上海大学 机电工程与自动化学院,上海 200444
  • 收稿日期:2018-06-22 出版日期:2020-08-30 发布日期:2020-01-09
  • 通讯作者: 冉峰 E-mail:ranfeng@mail.shu.edu.cn
  • 基金资助:
    国家自然科学基金资助项目(61376028,61674100);上海市科委重大基础研究计划资助项目(16JC1400602)

Recursive scanning algorithm for high-gray micro OLED display on silicon

SHEN Wenxin1, RAN Feng1(), GUO Aiying2, SHEN Huaming3   

  1. 1. Microelectronic Research and Development Center, Shanghai University, Shanghai 200444, China
    2. The New Display Technology and Application of Integrated Key Laboratory of Ministry of Education, Shanghai University, Shanghai 200444, China
    3. School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200444, China
  • Received:2018-06-22 Online:2020-08-30 Published:2020-01-09
  • Contact: RAN Feng E-mail:ranfeng@mail.shu.edu.cn

摘要:

硅基微显示器正向着高灰度、高帧率方向发展,而传统的扫描算法存在时间冗余问题。通过对数字脉宽调制扫描算法、灰度权值扫描算法及子场扫描算法进行研究,对微显示的扫描进行分析,建立了一种递归扫描模型,并推导出递归扫描算法在任意比特位的扫描结构。通过数学模型将扫描过程抽象为矩阵的形式,其原理是将整个显示空间分为多个子空间,充分利用数据传输过程中的等待时间使传输效率达到 100%。经现场可编程逻辑门阵列(field programmable gate array,FPGA) 硬件平台验证,在时钟频率 50 MHz、256 级灰阶下采用递归扫描算法可使转换效率达到 100%,同时帧率可达 85 Hz,基本可以满足高灰阶微显示器中帧率和灰度高、时钟频率低的要求。该扫描算法不仅可以运用在微显示器的图像数据传输,也可以运用在平板、大屏显示等领域。

关键词: 硅基微显示器, 高灰度级, 扫描算法, 子空间

Abstract:

While the traditional scanning algorithm has the problem of time redundancy, the new development in silicon-based micro display shows a tendency for high gray and high frame rate. Through the research of digital pulse width modulation (PWM) scanning algorithm, weight scan algorithm and subfield scanning algorithm, a recursive scanning model is established and the scanning structure of the recursive scanning algorithm in any bit is deduced. The scanning process is abstracted into matrix form by mathematical model, the principle is to divide the whole display space into many sub spaces, and make full use of the waiting time in the data transmission process, so that the transmission efficiency can reach 100%. It is verified by FPGA hardware platform that the recursive scanning algorithm can make the conversion efficiency reach 100% and the frame rate can reach 85 Hz at the clock frequency 50 MHz and 256 gray scale. It can mainly meet the requirement of high frame rate, high gray scale and low clock frequency in high gray level micro display. The scanning algorithm can not only be applied to the image data transmission of the micro display, but also can be utilized in the flat panel, large screen display and other fields.

Key words: micro-display on silicon, high gray levels, scanning algorithm, subspace

中图分类号: