[1] |
Tsai S W . A general theory of strength for anisotropic materials[J]. Journal of Composite Materials, 1971,5(1):58-80.
|
[2] |
Hill R . A theory of the yielding and plastic flow of anisotropic materials[J]. Proceedings of the Royal Society of London, 1948,193(1033):281-297.
|
[3] |
Hoffman O . The brittle strength of orthotropic materials[J]. Journal of Composite Materials, 1967,1(2):200-206.
|
[4] |
Hashin Z . Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980,47(2):329-334.
|
[5] |
McCarthy M A, Lawlor V P, Stanley W F , et al. Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints[J]. Composites Science and Technology, 2002,62(10):1415-1431.
|
[6] |
Qin T, Zhao L, Zhang J , et al. Fastener effects on mechanical behaviors of double-lap composite joints[J]. Composite Structures, 2013,100(5):413-423.
|
[7] |
Chen W H, Lee S S, Yeh J T . Three-dimensional contact stress analysis of a composite laminate with bolted joint[J]. Composite Structures, 1995,30(3):287-297.
|
[8] |
McCarthy C T . Experiences with modeling friction in composite bolted joints[J]. Journal of Composite Materials, 2005,39(21):1881-1908.
|
[9] |
Chishti M, Wang C H, Thomson R S , et al. Experimental investigation of damage progression and strength of countersunk composite joints[J]. Composite Structures, 2012,94(2):865-873.
|
[10] |
Santiuste C, Barbero E, Miguelez M H , et al. Computational analysis of temperature effect in composite bolted joints for aeronautical applications[J]. Journal of Reinforced Plastics and Composites, 2011,30(1):3-11.
|
[11] |
刘斌, 赵亮, 徐红炉 . 基于 Hashin 失效准则的复合材料螺栓连接损伤破坏研究[J]. 科学技术与工程, 2012,12(8):1740-1744.
|
[12] |
黄学优 . 复合材料螺栓连接接头失效行为研究[D]. 太原: 中北大学, 2016.
|
[13] |
周松 . 复合材料螺栓连接渐进损伤的实验及数值分析[D]. 哈尔滨: 哈尔滨工程大学, 2013.
|
[14] |
朱红红 . 复合材料螺栓连接接头失效分析与强度预测[D]. 郑州: 郑州大学, 2012.
|
[15] |
Camanho P P . A progressive damage model for mechanically fastened joints in composite laminates[J]. Journal of Composite Materials, 1999,33(24):2248-2280.
|
[16] |
Willis B M . Applying finite element analysis with a focus on tensile damage modeling of carbon fiber reinforced polymer laminates [D]. Columbus, Ohio: The Ohio State University, 2013.
|
[17] |
Riccio A . Effects of geometrical and material features on damage onset and propagation in single-lap bolted composite joints under tensile load: part Ⅱ-numberical studies[J]. Journal of Composite Materials, 2005,39(23):2091-2112.
|
[18] |
Riccio A . Effects of geometrical and material features on damage onset and propagation in single-lap bolted composite joints under tensile load: part Ⅰ-experimental studies[J]. Journal of Composite Materials, 2005,39(23):2071-2090.
|