界面结合方式对氧化石墨烯-碳纤维/环氧树脂复合材料性能的影响

doi:10.12066/j.issn.1007-2861.2123

Abstract

Abstract:

Graphene oxide (GO)-carbon fibre/epoxy (EP) composites were prepared via different synthesis methods. The three interface bonding mechanisms were discussed. The effects of different interfaces on the interfacial shear strength (IFSS), flexural properties, and interlaminar shear strength (ILSS) of GO-carbon fibre/epoxy composites were compared and analysed. The results show that the role of GO on the interface of the composite is primarily to enhance the mechanical interlocking effect at the interface and the force generated by the formation of a small amount of chemical bonds. The interfacial bonding mode of GO adsorbed on the surface of carbon fibre and subsequently formed with epoxy resin increases the interfacial shear strength of the composite by 66.97%, the bending strength by 31.84%, and the interlaminar shear strength by 10%. The utilisation of GO is the highest, and the process is simple. It is therefore conducive to the realisation of industrial production.

Key words: graphene oxide (GO), epoxy (EP) resin, carbon fibre (CF), mechanical properties

CLC Number:

TB332

ZHANG Yaping, SHI Lei, GUO Xiaofeng, LIU Liqi. Effects of different interfaces on mechanical properties of graphene oxide-carbon fibre/epoxy resin composites[J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(6): 927-936.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: https://www.journal.shu.edu.cn/EN/10.12066/j.issn.1007-2861.2123

https://www.journal.shu.edu.cn/EN/Y2020/V26/I6/927

Figures/Tables 11

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Fig. 11

References 26

[1]	Zhang R L, Gao B, Du W T, et al. Enhanced mechanical properties of multiscale carbon fiber/epoxy composites by fiber surface treatment with graphene oxide/polyhedral oligomeric silsesquioxane[J]. Composites: Part A, 2016,84:455-463. doi: 10.1016/j.compositesa.2016.02.021
[2]	李红. 碳纤维增强环氧树脂基复合材料的性能研究[J]. 中国胶粘剂, 2009,18(3):21-25.
[3]	许丽丹, 王澜. 碳纤维增强树脂基复合材料的应用研究[J]. 塑料制造, 2007(S1):81-85.
[4]	陈立军, 武凤琴, 张欣宇, 等. 环氧树脂/碳纤维复合材料的成型工艺与应用[J]. 工程塑料应用, 2007,35(10):77-80.
[5]	Sun Y, Wang S, Li M, et al. Improvement of out-of-plane thermal conductivity of composite laminate by electrostatic flocking[J]. Materials and Design, 2018,144:263-270. doi: 10.1016/j.matdes.2018.02.031
[6]	Juraeva M, Ryu K J, Noh S H, et al. Lightweight material for the speed reducer housing of a car chassis[J]. Journal of Mechanical Science and Technology, 2017,31(7):3219-3224. doi: 10.1007/s12206-017-0611-5
[7]	Rondina F, Taddia S, Mazzocchetti L, et al. Development of full carbon wheels for sport cars with high-volume technology[J]. Composite Structures, 2018,192:368-378. doi: 10.1016/j.compstruct.2018.02.083
[8]	陈平, 王德中. 环氧树脂[M]. 北京: 化学工业出版社, 1999: 215-244.
[9]	孙曼灵, 吴良义. 环氧树脂应用原理与技术[M]. 北京: 机械工业出版社, 2002: 1-10.
[10]	Pathak A K, Borah M, Gupta A, et al. Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites[J]. Composites Science and Technology, 2016,135:28-38. doi: 10.1016/j.compscitech.2016.09.007
[11]	Lubineau G, Rahaman A. A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements[J]. Carbon, 2012,50(7):2377-2395. doi: 10.1016/j.carbon.2012.01.059
[12]	Yan W, Liu H Y, Mai Y W. Numerical study on the mode Ⅰ delamination toughness of $z$-pinned laminates[J]. Composites Science and Technology, 2003,63(10):1481-1493. doi: 10.1016/S0266-3538(03)00167-2
[13]	Pathak A K, Borah M, Gupta A, et al. Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites[J]. Composites Science and Technology, 2016,135:28-38. doi: 10.1016/j.compscitech.2016.09.007
[14]	陈建剑, 俞科静, 钱坤, 等. 氧化石墨烯改性环氧树脂/碳纤维复合材料拉伸性能的研究[J]. 化工新型材料, 2012,40(9):63-65.
[15]	Ashori A, Rahmani H, Bahrami R. Preparation and characterization of functionalized graphene oxide/carbon fiber/epoxy nanocomposites[J]. Polymer Testing, 2015,48(3):82-88. doi: 10.1016/j.polymertesting.2015.09.010
[16]	Han X, Zhao Y, Sun J M, et al. Effect of graphene oxide addition on the interlaminar shear property of carbon fiber-reinforced epoxy composites[J]. Carbon, 2017,117:489.
[17]	Deng C, Jiang J, Liu F, et al. Influence of graphene oxide coatings on carbon fiber by ultrasonically assisted electrophoretic deposition on its composite interfacial property[J]. Surface and Coatings Technology, 2015,272(8):176-181. doi: 10.1016/j.surfcoat.2015.04.008
[18]	Zhang R L, Gao B, Ma Q H, et al. Directly grafting graphene oxide onto carbon fiber and the effect on the mechanical properties of carbon fiber composites[J]. Materials and Design, 2016,93:364-369. doi: 10.1016/j.matdes.2016.01.003
[19]	Li Y B, Peng Q Y, He X D, et al. Synjournal and characterization of a new hierarchical reinforcement by chemically grafting graphene oxide onto carbon fibers[J]. Journal of Materials Chemistry, 2012,22(36):18748-18752. doi: 10.1039/c2jm32596a
[20]	Chen L, Jin H, Xu Z, et al. A design of gradient interphase reinforced by silanized graphene oxide and its effect on carbon fiber/epoxy interface[J]. Materials Chemistry and Physics, 2014,145(1/2):186-196. doi: 10.1016/j.matchemphys.2014.02.001
[21]	Jiang D, Liu L, Wu G, et al. Mechanical properties of carbon fiber composites modified with graphene oxide in the interphase[J]. Polymer Composites, 2017,38(11):2425-2432. doi: 10.1002/pc.v38.11
[22]	Wang C, Ge H, Ma X, et al. Effect of graphene oxide mixed epoxy on mechanical properties of carbon fiber/acrylonitrile-butadiene-styrene composites[J]. Journal of Nanoscience and Nanotechnology, 2018,18(4):2513-2520. doi: 10.1166/jnn.2018.14335 pmid: 29442921
[23]	唐梦龙, 于思荣, 孙伟松, 等. 氧化石墨烯/环氧树脂复合材料的制备与性能[J]. 功能材料, 2016,47(S1):143-147.
[24]	王亚平. 石墨烯/聚酰亚胺纳米复合材料的制备与性能研究[D]. 上海: 东华大学, 2013.
[25]	Li M, Gu Y, Liu Y, et al. Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers[J]. Carbon, 2013,52:109-121. doi: 10.1016/j.carbon.2012.09.011
[26]	杨序纲. 复合材料界面[M]. 北京: 化学工业出版社, 2010: 8-9.

Effects of different interfaces on mechanical properties of graphene oxide-carbon fibre/epoxy resin composites

RichHTML

PDF

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 11

References 26

Related Articles 10

Recommended Articles

Metrics

Comments

[1]	YAO Yumin, LI Hong, RUAN Jiamiao, YANG Min, REN Musu, SUN Jinliang. Influence of mesophase pitch based carbon flber on the properties of carbon/carbon-copper composites [J]. Journal of Shanghai University（Natural Science Edition）, 2025, 31(5): 789-796.
[2]	LAN Panpan, LIU Bin. First-principles Calculations of Electronic Structure and Mechanical Properties of (Hf_0.25Zr_0.25Ta_0.25Nb_0.25)C [J]. Journal of Shanghai University（Natural Science Edition）, 2025, 31(1): 80-93.
[3]	GAN Zhixin, HUANG Jizhong, ZHANG Yue, LUO Qingyang, ZHANG Ruoyu, DU Houmeng, . Damage characteristics and weathering evaluation of Yungang Grottoes sandstone under freeze-thaw [J]. Journal of Shanghai University（Natural Science Edition）, 2024, 30(1): 17-030.
[4]	WANG Jiangyu, GUO Xiaofeng, SHI Lei, CHEN Liquan, WANG Xu, LIU Liqi. Effect of molybdenum disulfide-graphene oxide nanohybrids on anticorrosive waterborne polyurethane acrylate coatings [J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(1): 121-131.
[5]	LIU Chang, YANG Hongmei, CHEN Jinyang, ZENG Xiangqiong. Preparation and tribological properties of silane/graphene oxide composite coating on glass substrate [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(5): 950-958.
[6]	XIE Yaxi, CHEN Yexin, MA Xingxing. Effects of boron content on microstructure and mechanical properties of FeCoNiCrAl$_{\bf 0.1}$B$_{ x }$ high-entropy alloy [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(2): 280-288.
[7]	LIU Li, TU Duoxiang. Effects of HSP content on microstructure and mechanical properties of EVA foamed materials [J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(2): 207-215.
[8]	DI Qinfeng, WANG Nan, CHEN Feng, WANG Wenchang, NIU Xinming, ZHANG Jincheng. Research progress on the mechanical properties of threaded connections for oil country tubular goods [J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(2): 163-180.
[9]	GAO Yufang, PENG Yuqing, SUN Ningxia, LI Aijun, BAI Ruicheng. Preparation and properties of electroless Cu plated Kevlar fiber via non-etching and Pd-free activation [J]. Journal of Shanghai University（Natural Science Edition）, 2019, 25(1): 75-83.
[10]	CHANG Yan-Li, CHEN Sheng, CAO Ao-Neng. Mechanism of Pressure Accelerated Solvothermal Reduction of Graphene Oxide [J]. Journal of Shanghai University（Natural Science Edition）, 2010, 16(6): 577-581.