铅酸电池多物理场建模与数值模拟

doi:10.12066/j.issn.1007-2861.2144

Abstract

Abstract:

Herein, the discharge mechanism of lead-acid batteries was discussed and a multiphysics model was proposed to simulate the battery discharge process. The model was tested and verified on the basis of the experimental data of several commercial batteries. The universality of the model was guaranteed by the average empirical parameters of the model. The model was used to analyse the structural parameters of existing batteries, and improvement of the battery structure was proposed on the basis of the simulation results. Herein, a new design scheme was presented for the low-cost fabrication of batteries having reduced volume, lighter weight, and higher capacity. Multiphysics modelling and numerical simulations could greatly reduce the cost and time required for the development of novel batteries.

Key words: lead-acid battery, discharge, physicochemical model, numerical simulation

CLC Number:

TM743

SHI Meihua, DONG Li, YUAN Jingchao, ZHANG Shuxiang, SHAO Qinsi, YAN Wei, LI Jiang, LI Aijun, ZHANG Jiujun. Multiphysics model and numerical simulations of lead-acid battery[J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(3): 444-453.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: https://www.journal.shu.edu.cn/EN/10.12066/j.issn.1007-2861.2144

https://www.journal.shu.edu.cn/EN/Y2021/V27/I3/444

Figures/Tables 5

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

[1]	巴普洛夫, 段喜春, 苑松. 铅酸蓄电池科学与技术 [M]. 北京: 机械工业出版社, 2015.
[2]	Simonsson D. A mathematical model for the porous lead dioxide electrode[J]. Journal of Applied Electrochemistry, 1973,3(4):261-270. doi: 10.1007/BF00613032
[3]	Ekdunge P, Simonsson D. The discharge behaviour of the porous lead electrode in the lead-acid battery. Ⅱ. Mathematical model[J]. Journal of Applied Electrochemistry, 1989,19(2):136-141. doi: 10.1007/BF01062290
[4]	Bernardi D M. Nucleation of lead sulfate in porous lead-dioxide electrodes[J]. Journal of the Electrochemical Society, 1990,137(6):A1670-A1680.
[5]	Bernardi D M, Carpenter M K. A mathematical model of the oxygen-recombination lead-acid cell[J]. Journal of the Electrochemical Society, 1995,142(8):A2631-A2642.
[6]	Srinivasan V, Wang G Q, Wang C Y. Mathematical modeling of current-interrupt and pulse operation of valve-regulated lead acid cells[J]. Journal of the Electrochemical Society, 2003,150(3):A316-A325. doi: 10.1149/1.1541005
[7]	Newman J S, Tobias C W. Theoretical analysis of current distribution in porous electrodes[J]. Journal of the Electrochemical Society, 1962,109(12):1183-1191. doi: 10.1149/1.2425269
[8]	Ekdunge P, Simonsson D. Recharge kinetics of the porous lead dioxide electrode Ⅰ. The effect of structural changes[J]. Journal of the Electrochemical Society, 1985,132(11):A2521-A2529.
[9]	Ceraolo M. New dynamical models of lead-acid batteries[J]. IEEE Transactions on Power Systems, 2000,15(4):1184-1190. doi: 10.1109/59.898088
[10]	Barsali S, Ceraolo M. Dynamical models of lead-acid batteries: implementation issues[J]. IEEE Transactions on Energy Conversion, 2002,17(1):16-23. doi: 10.1109/60.986432
[11]	Alagheband A, Azimi M, Hashemi H, et al. Optimization of grid configuration by investigating its effect on positive plate of lead-acid batteries via numerical modeling[J]. Journal of Energy Storage, 2017,12:202-214. doi: 10.1016/j.est.2017.04.012
[12]	Yamada K, Maeda K, Sasaki K, et al. Computer-aided optimization of grid design for high-power lead-acid batteries[J]. Journal of Power Sources, 2005,144(2):352-357. doi: 10.1016/j.jpowsour.2004.10.012
[13]	Schiffer J, Sauer D U, Bindner H, et al. Model prediction for ranking lead-acid batteries according to expected lifetime in renewable energy systems and autonomous power-supply systems[J]. Journal of Power Sources, 2007,168(1):66-78. doi: 10.1016/j.jpowsour.2006.11.092
[14]	Franke M, Kowal J. Empirical sulfation model for valve-regulated lead-acid batteries under cycling operation[J]. Journal of Power Sources, 2018,380:76-82. doi: 10.1016/j.jpowsour.2018.01.053
[15]	Homan B, Marnix V, Hurink J L, et al. A realistic model for battery state of charge prediction in energy management simulation tools[J]. Energy, 2019,171:205-217. doi: 10.1016/j.energy.2018.12.134
[16]	Dimpault-Darcy E C. A two-dimensional mathematical model of a porous lead dioxide electrode in a lead-acid cell[J]. Journal of the Electrochemical Society, 1988,135(2):A278-A285.
[17]	Bernardi D M, Gu H, Schoene A Y. Two-dimensional mathematical model of a lead-acid cell[J]. Journal of the Electrochemical Society, 1993,140(8):A2250-A2258.
[18]	Cugnet M, Laruelle S, Grugeon S, et al. A mathematical model for the simulation of new and aged automotive lead-acid batteries[J]. Journal of the Electrochemical Society, 2009,156(12):A974-A985. doi: 10.1149/1.3224868
[19]	Gu W B, Wang C Y, Liaw B Y. Numerical modeling of coupled electrochemical and transport processes in lead-acid batteries[J]. Journal of the Electrochemical Society, 1997,144(6):A2053-A2061.
[20]	Thorat I V, Stephenson D E, Zacharias N A, et al. Quantifying tortuosity in porous Li-ion battery materials[J]. Journal of Power Sources, 2009,188(2):592-600. doi: 10.1016/j.jpowsour.2008.12.032
[21]	Patel K K, Paulsen J M, Desilvestro J. Numerical simulation of porous networks in relation to battery electrodes and separators[J]. Journal of Power Sources, 2003,122(2):144-152. doi: 10.1016/S0378-7753(03)00399-9
[22]	Kashkooli A G, Farhad S, Fung A S, et al. Effect of convective mass transfer on lead-acid battery performance[J]. Electrochimica Acta, 2013,97:278-288. doi: 10.1016/j.electacta.2013.02.116
[23]	Boovaragavan V, Methakar R N, Ramadesigan V, et al. A mathematical model of the lead-acid battery to address the effect of corrosion[J]. Journal of the Electrochemical Society, 2009,156(11):A854-A862. doi: 10.1149/1.3190510

Multiphysics model and numerical simulations of lead-acid battery

RichHTML

PDF

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 5

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	DAI Liusi, YAO Hao, REN Chong. Analysis of progressive collapse resistance of bolted beam-to-upright connection substructures in steel storage racks [J]. Journal of Shanghai University（Natural Science Edition）, 2026, 32(3): 447-463.
[2]	SHEN Yang, WANG Changhong, MA Chengtao, TANG Daofei, YANG Tianxiao. Bearing capacity and failure mechanism of bored piles with constrained grouting expansion [J]. Journal of Shanghai University（Natural Science Edition）, 2026, 32(3): 491-506.
[3]	WANG Xuerou, FAN Dongliang, TANG Xiaofeng, DONG Yuhong. Effect of thermal radiation and particle size dispersity on flow and heat transfer in particle-laden turbulent channel flow [J]. Journal of Shanghai University（Natural Science Edition）, 2026, 32(1): 96-107.
[4]	HU Zuhui, KUANG Wangwang, YANG Mengyuan, GUO Pan, ZHANG Hui, WANG Yin, REN Wei. Phase Lab based on phase-fleld-flow-fleld coupling model: a simulation of microstructure evolution in multiphase growth and nucleation [J]. Journal of Shanghai University（Natural Science Edition）, 2025, 31(5): 848-859.
[5]	JIN Zeyu, SHI Meihua, LI Aijun. [J]. Journal of Shanghai University（Natural Science Edition）, 2025, 31(2): 348-356.
[6]	ZHENG Tianqing, XU Yanyi, ZHANG Yunhu, ZHAI Qijie. Distribution and evolution of the temperature field in a continuous casting billet heated by an electric current [J]. Journal of Shanghai University（Natural Science Edition）, 2022, 28(5): 857-871.
[7]	YAN Jia, CHAI Junsheng, REN Guozhe, WU Chenhan, TANG Xiaolong, YANG Xiaoquan, DING Jue, WENG Peifen. Numerical simulations of aero-engine turbine flow and noise [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(6): 993-1009.
[8]	LIAN Jingjie, GUO Jiahong, LEI Zuosheng. Three-dimensional numerical simulations of suspended metal droplet oscillations in high-frequency, amplitude-modulated, alternating electromagnetic fields [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(5): 879-890.
[9]	DENG Fang, HAN Guilai, LIU Meikuan, DING Jue, WENG Peifen, JIANG Zonglin. Numerical simulation of the supersonic flow/jet flow and their interaction at different flight altitudes [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(2): 307-324.
[10]	GAO Junli, XU Hongfei, YUAN Chuan, CAO Wei. Numerical simulation of particle flow during a drawing test of a ribbed geomembrane and sandy soil interface under different temperatures [J]. Journal of Shanghai University（Natural Science Edition）, 2021, 27(2): 336-346.
[11]	ZHAO Huiling, WANG Zhenjiang. Shear performance of new joint for prestressed I-shaped retaining piles [J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(4): 640-650.
[12]	CHEN Bo, HE Youhua. Estimation method of moving average model with missing data [J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(2): 181-188.
[13]	DI Qinfeng, WANG Nan, CHEN Feng, WANG Wenchang, NIU Xinming, ZHANG Jincheng. Research progress on the mechanical properties of threaded connections for oil country tubular goods [J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(2): 163-180.
[14]	LIU Di, XIAO Yi, JIANG Xuwei, LI Hong, YU Mingming, REN Musu, SUN Jinliang. Anti-penetration capability of SiC/UHMWPE composite armour plates through experimental and numerical simulation [J]. Journal of Shanghai University（Natural Science Edition）, 2020, 26(2): 234-243.
[15]	Jie GU, Mengxi ZHANG. Stability analysis of reinforced slopes based on strength reduction theory [J]. Journal of Shanghai University（Natural Science Edition）, 2019, 25(6): 990-1002.