[1] 方岱宁, 张一慧, 崔晓东. 轻质点阵材料力学与多功能设计[M]. 北京: 科学出版社, 2009: 5-23.[2] Chen C, Lu T J, Fleck N A. Effect of imperfections on the yielding of two-dimensional foams [J]. Journal of the Mechanics and Physics of Solids, 1999, 47(11): 2235-2272.[3] Bourasseau N, Moulin E, Delebarre C, et al. Radome health monitoring with Lamb waves: experimental approach [J]. NDT & E International, 2000, 33(6): 393-400.[4] Hay T R, Wei L, Rose J L, et al. Rapid inspection of composite skin-honeycomb core structures with ultrasonic guided waves [J]. Journal of Composite Materials, 2003, 37(10): 929-939.[5] Diamanti K, Soutis C, Hodgkinson J M. Lamb waves for the non-destructive inspection of monolithic and sandwich composite beams [J]. Composites Part A: Applied Science andManufacturing, 2005, 36(2): 189-195.[6] Maslov K, Kundu T. Selection of Lamb modes for detecting internal defects in composite laminates [J]. Ultrasonics, 1997, 35(2): 141-150.[7] 张海燕, 他得安, 刘镇清. 层状各向异性复合板中的兰姆波[M]. 北京: 科学出版社, 2008: 45-46.[8] Song F, Huang G L, Hudson K. Guided wave propagation in honeycomb sandwich structures using a piezoelectric actuator/sensor system [J]. Smart Materials and Structures, 2009, 18(12): 1-8.[9] Hosseini S M H, Gabbert U. Analysis of guided Lamb wave propagation (GW) in honeycomb sandwich panels [J]. PAMM, 2010, 10(1): 11-14.[10] Lu Y, Ye L, Su Z, et al. Quantitative evaluation of crack orientation in aluminium plates based on Lamb waves [J]. Smart Materials and Structures, 2007, 16(5): 1907-1914.[11] Yang C, Ye L, Su Z, et al. Some aspects of numerical simulation for Lamb wave propagation in composite laminates [J]. Composite Structures, 2006, 75(1): 267-275. |