上海大学学报(自然科学版) ›› 2022, Vol. 28 ›› Issue (5): 722-747.doi: 10.12066/j.issn.1007-2861.2430
任忠鸣1,2(), 韩东宇1,2, 玄伟东1,2, 陈超越1,2, 帅三三1,2, 徐松哲1,2, 俞晟1,2, 余建波1,2, 王江1,2
收稿日期:
2022-07-06
出版日期:
2022-10-30
发布日期:
2022-11-12
通讯作者:
任忠鸣
E-mail:zmren@shu.edu.cn
作者简介:
任忠鸣(1958—), 男, 教授, 博士生导师, 博士, 研究方向为电磁场下冶金与材料制备. E-mail: zmren@shu.edu.cn基金资助:
REN Zhongming1,2(), HAN Dongyu1,2, XUAN Weidong1,2, CHEN Chaoyue1,2, SHUAI Sansan1,2, XU Songzhe1,2, YU Sheng1,2, YU Jianbo1,2, WANG Jiang1,2
Received:
2022-07-06
Online:
2022-10-30
Published:
2022-11-12
Contact:
REN Zhongming
E-mail:zmren@shu.edu.cn
摘要:
涡轮叶片是燃气轮机的核心热端部件, 其研发和制造是一个国家工业的发展规模和技术水平的重要体现. 概述了燃气轮机叶片制备技术的近期研究进展. 结合课题组的研究, 围绕燃气轮机叶片的定向凝固、微观组织的电磁场辅助调控、陶瓷型芯制备、 尺寸精度控制、高温合金纯净化冶炼、增材制造等, 介绍了在相关领域取得的研究进展, 并提出重点关注方向.
中图分类号:
任忠鸣, 韩东宇, 玄伟东, 陈超越, 帅三三, 徐松哲, 俞晟, 余建波, 王江. 燃气轮机叶片制备技术研究进展[J]. 上海大学学报(自然科学版), 2022, 28(5): 722-747.
REN Zhongming, HAN Dongyu, XUAN Weidong, CHEN Chaoyue, SHUAI Sansan, XU Songzhe, YU Sheng, YU Jianbo, WANG Jiang. Research progress on preparation technology of gas turbine blades[J]. Journal of Shanghai University(Natural Science Edition), 2022, 28(5): 722-747.
[1] | 李孝堂. 燃气轮机的发展及中国的困局[J]. 航空发动机, 2011, 37(3): 1-7. |
[2] | 张文普, 丰镇平. 燃气轮机技术的发展与应用[J]. 燃气轮机技术, 2002, 15(3): 17-22, 25. |
[3] | 朱梅林. 燃气轮机[M]. 武汉: 华中工学院出版社, 1982. |
[4] | 翁史烈. 燃气轮机与蒸汽轮机[M]. 上海: 上海交通大学出版社, 1996. |
[5] | 李孝堂, 侯凌云, 杨敏, 等. 现代燃气轮机技术[M]. 北京: 航空工业出版社, 2006. |
[6] | 沈炳正, 黄希程. 燃气轮机装置[M]. 北京: 机械工业出版社, 1981. |
[7] | 谷文君. 浅析燃气轮机发展历程[J]. 黑龙江科技信息, 2008, 34: 25,288. |
[8] | 沈迪刚. 国外燃气轮机发展途径及方向[J]. 航空发动机, 2000, 27(1): 43-48. |
[9] | 陈荣章. 航空铸造涡轮叶片合金和工艺发展的回顾与展望[J]. 航空制造技术, 2002(2): 19-23. |
[10] | 王家炘, 黄积荣, 林建生. 金属的凝固及其控制[M]. 北京: 机械工业出版社, 1983. |
[11] |
Versnyder F L, Shank M E. The development of columnar grain and single crystal high temperature materials through directional solidification[J]. Materials Science and Engineering, 1970, 6(4): 213-247.
doi: 10.1016/0025-5416(70)90050-9 |
[12] | Erickson J S, Owczarski W A, Curran P M. Advances in fabricating aerospace structures process speeds up directional solidification[J]. Metal Progress, 1971, 109(3): 58-60. |
[13] |
Brundidge G L, Vandrasek D, Wang B. Structure refinement by a liquid metal cooling solidification process for single-crystal nickel-base superalloys[J]. Metallurgical and Materials Transactions A, 2011, 43: 965-976.
doi: 10.1007/s11661-011-0920-8 |
[14] | 问亚岗, 崔春娟, 田露露, 等. 定向凝固技术的研究进展与应用[J]. 材料导报A: 综述篇, 2016, 30(2): 116-120. |
[15] | 傅恒志. 先进材料定向凝固[M]. 北京: 科学出版社, 2008. |
[16] | Konter M. A novel casting process for single crystal gas turbune components[C]// The 9th International Symposium on Superalloys. 2000: 189-200. |
[17] | 傅恒志, 沈军, 郝启堂, 等. 镍基高温合金真空电磁约束成形与定向凝固[J]. 中国有色金属学报, 2002, 12(6): 1081-1086. |
[18] |
Fu H Z, Xie F Q. The solidification characteristics of near rapid and supercooling directional solidification[J]. Sci Techn Adv Mater, 2001, 2(1): 193-196.
doi: 10.1016/S1468-6996(01)00048-1 |
[19] |
Yang S, Huang W, Liu W J. Development of microstructures in laser surface remelting of DD2 single crystal[J]. Acta Mater, 2002, 50(2): 315-325.
doi: 10.1016/S1359-6454(01)00340-8 |
[20] | Nakagawa Y, Ohtomo Y, Sajga Y. Heat treatment, microstructure, and creep strength of $\gamma $/$\gamma $'-$\alpha $ eutectic directionally solidified by fluidized bed quenching[C]// Proceedings of the Fourth International Symposium. 1980: 267-274. |
[21] |
Liao S, Han Y F. A study of the heat parameters during bidirectional solidification[J]. Sci Technol Adv Mater, 2001, 2(1): 281-284.
doi: 10.1016/S1468-6996(01)00070-5 |
[22] | 宋先跃, 唐建新, 刘振伟. 定向凝固理论与技术的发展[J]. 金属铸锻焊技术, 2009, 38(15): 59-63. |
[23] |
Ma D. Novel casting processes for single-crystal turbine blades of superalloys[J]. Frontiers of Mechanical Engineering, 2018, 13(1): 3-16.
doi: 10.1007/s11465-018-0475-0 |
[24] | 任忠鸣, 雷作胜, 王冠, 等. 一种用于定向凝固的冷却方法及装置: CN101786156[P]. 2010-07-28. |
[25] |
任忠鸣, 雷作胜, 李传军, 等. 电磁冶金技术研究新进展[J]. 金属学报, 2020, 56(4): 583-600.
doi: 10.11900/0412.1961.2019.00373 |
[26] |
Xuan W, Lan J, Zhao D, et al. Effect of a high magnetic field on $\gamma\prime $ phase for Ni-based single crystal superalloy during directional solidification[J]. Metallurgical and Materials Transactions B, 2018, 49(4): 1919-1924.
doi: 10.1007/s11663-018-1293-9 |
[27] |
Li C, Yang H, Ren Z, et al. On nucleation temperature of pure aluminum in magnetic fields[J]. Progress in Electromagnetics Research Letters, 2010, 15: 45-52.
doi: 10.2528/PIERL10041412 |
[28] |
Xuan W, Liu H, Li C, et al. Effect of a high magnetic field on microstructures of ni-based single crystal superalloy during seed melt-back[J]. Metallurgical and Materials Transactions B, 2016, 47(2): 828-833.
doi: 10.1007/s11663-015-0580-y |
[29] | Xuan W, Ren Z, Li C. Experimental evidence of the effect of a high magnetic field on the stray grains formation in cross-section change region for ni-based superalloy during directional solidification[J]. Metallurgical & Materials Transactions A, 2015, 46A(4): 1461-1466. |
[30] | Xuan W, Lan J, Liu H, et al. Effects of a high magnetic field on the microstructure of ni-based single-crystal superalloys during directional solidification[J]. Metallurgical & Materials Transactions A, 2017, 48(8): 3804-3813. |
[31] |
Khine Y Y, Walker J S. Thermoelectric magnetohydrodynamic effects during Bridgman semiconductor crystal growth with a uniform axial magnetic field[J]. Journal of Crystal Growth, 1999, 183(1/2): 150-158.
doi: 10.1016/S0022-0248(97)00394-1 |
[32] |
Li C J, Yuan Z J, Fan Y F, et al. Microstructure and mechanical properties of a Ni-based superalloy after heat treatment in a steady magnetic field[J]. Journal of Materials Processing Tech, 2016, 246: 176-184.
doi: 10.1016/j.jmatprotec.2017.03.018 |
[33] | 任维丽, 任忠鸣, 房双, 等. 强磁场下时效热处理对高温合金DZ417G组织和硬度的影响[J]. 钢铁研究学报, 2011, 23(2): 419-422. |
[34] |
Li C J, Guo G, Yuan Z J, et al. Chemical segregation and coarsening of $\gamma \prime $ precipitates in Ni-based superalloy during heat treatment in alternating magnetic field[J]. Journal of Alloys and Compounds, 2017, 720: 272-276.
doi: 10.1016/j.jallcom.2017.05.253 |
[35] |
Xuan W, Song G, Li Y, et al. Evolution mechanism of microporosity of nickel-based single-crystal superalloy during solution heat treatment under an alternating magnetic field[J]. Metallurgical and Materials Transactions B, 2021, 52(1): 30-35.
doi: 10.1007/s11663-020-02043-z |
[36] |
Xuan W, Du L, Han Y, et al. Investigation on microstructure and creep properties of nickel based single crystal superalloys PWA1483 during heat treatment under an alternating magnetic field[J]. Materials Science and Engineering: A, 2019, 762: 138087.
doi: 10.1016/j.msea.2019.138087 |
[37] |
Xuan W, Song G, Duan F, et al. Enhanced creep properties of nickel-base single crystal superalloy CMSX-4 by high magnetic field[J]. Materials Science and Engineering A, 2020, 803: 140729.
doi: 10.1016/j.msea.2020.140729 |
[38] | 张玲, 刘建平, 孙革, 等. 单晶叶片用硅基陶瓷型芯制备与性能研究[J]. 铸造, 2012, 61(8): 941-943. |
[39] | 李波, 于兴福, 刘家胜, 等. 型芯抗弯强度的影响因素及空心型芯的制备技术[J]. 铸造, 2012, 61(3): 316-319. |
[40] |
Singh K. Advanced materials for land based gas turbines[J]. Transactions of the Indian Institute of Metals, 2014, 67(5): 601-615.
doi: 10.1007/s12666-014-0398-3 |
[41] | 姜不居. 实用熔模铸造技术[M]. 沈阳: 辽宁科技出版社, 2008. |
[42] | 徐子烨, 玄伟东, 张金垚, 等. 烧结温度和粒度分布对多孔氧化硅陶瓷型芯材料性能的影响[J]. 上海大学学报 (自然科学版), 2015, 21(1): 28-37. |
[43] | 任兴孚. 一种使用硅树脂增强硅基陶瓷型芯以提高力学性能的方法: CN104909830A[P]. 2015-09-16. |
[44] | 杨嘉楠. 硅基陶瓷型芯的制备及性能研究[D]. 南京: 东南大学, 2017. |
[45] | 赵登科, 玄伟东, 刘利俊, 等. 硅酸锆含量对硅基陶瓷型芯性能的影响[J]. 上海大学学报 (自然科学版), 2019, 25(4): 453-461. |
[46] | 李寒松, 玄伟东, 潘文轩, 等. 电熔莫来石含量对硅基陶瓷型芯性能的影响[J]. 铸造, 2020, 69(8): 861-865. |
[47] | 肖祖德, 玄伟东, 段方苗, 等. 石英纤维对氧化硅陶瓷型芯性能的影响[J]. 铸造, 2021, 70(9): 1072-1079. |
[48] |
Pan W, Xuan W, Duan F, et al. Influences of mullite fibers on mechanical and thermal properties of silica-based ceramic cores[J]. International Journal of Applied Ceramic Technology, 2021, 18(6): 2284-2292.
doi: 10.1111/ijac.13851 |
[49] |
Pollock T M, Tresa S. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties[J]. Journal of Propulsion and Power, 2006, 22(2): 361-361.
doi: 10.2514/1.18239 |
[50] |
Xuan W D, Du L F, Song G, et al. Some new observations on interface reaction between nickel-based single crystal superalloy CMSX-4 and silicon oxide ceramic core[J]. Corrosion Science, 2020, 177: 108969.
doi: 10.1016/j.corsci.2020.108969 |
[51] | 吴庆辉, 许剑伟, 方向, 等. 单晶空心涡轮叶片壁厚测量方法比较[J]. 无损检测, 2017, 39(7): 54-57. |
[52] | 张琼元, 杨功显, 赵代银, 等. 大尺寸重型燃机叶片三坐标测量方法[J]. 东方汽轮机, 2016(3): 46-49. |
[53] | 陆佳艳, 熊昌友, 何小妹, 等. 航空发动机叶片型面测量方法评述[J]. 计测技术, 2009, 29(3): 1-3. |
[54] | 师昌绪, 仲增墉. 高温合金五十年[M]. 北京: 冶金工业出版社, 2006. |
[55] |
Mimura K, Kornukai T, Isshiki M. Purification of chromium by hydrogen plasma-arc zone melting[J]. Materials Science and Engineering A, 2005, 403(1/2): 11-16.
doi: 10.1016/j.msea.2005.03.113 |
[56] | 姚成方, 郭喜平, 郭海生, 等. 电弧熔炼 Nb-Ti-Si-Cr-Hf-Al-B-Y 超高温合金母合金锭的组织形成和成分分布特点[J]. 材料工程, 2007 (增刊 1): 164-168. |
[57] | 陆锡才. 高温合金电渣重熔锭表面缺陷的分析[J]. 特殊钢, 2002, 23(4): 54-55. |
[58] | 谭毅, 石爽. 高纯材料电子束精炼制备技术研究现状与发展趋势[J]. 航空制造技术, 2018, 61(23/24): 28-36. |
[59] | 杜金辉, 吕旭东, 董建新, 等. 国内变形高温合金研制进展[J]. 金属学报, 2019, 55(9): 1115-1132. |
[60] | 冯兆龙, 郑晓光. 半连续式真空感应炉冶炼镍基高温合金[J]. 大型铸锻件, 2012(2): 29-31. |
[61] | 牛建平, 杨克努, 孙晓峰, 等. 用CaO坩埚真空感应熔炼镍基高温合金脱氧研究[J]. 金属学报, 2002, 38(3): 303-308. |
[62] | 金开锋, 吴瑞云, 薛丹斌, 等. 工业生产镍基高温合金K418脱氧脱氮工艺研究[J]. 新技术新工艺, 2021(4): 15-18. |
[63] | 唱鹤呜, 孟庆应, 傅杰. 金属液的脱氮[J]. 钢铁研究学报, 1995(5): 73-79. |
[64] | 张裕嘉. 增压减压法净化低碳钢及镍基高温合金 JG4246A 的研究[D]. 上海: 上海大学, 2019. |
[65] | Xu B Q, Yang B, Wan H L, et al. Preparing titanium powders by calcium vapor reduction process of titanium dioxide[J]. Supplemental Proceedings: General Paper Selections, 2011, 3: 501-508. |
[66] |
Elanski D, Lim J W, Mimura K, et al. Impurity removal from Zr, Nb and Ta metals by hydrogen plasma arc melting and thermodynamic estimation of hydride formation[J]. Journal of Alloys and Compounds, 2006, 413(1/2): 251-258.
doi: 10.1016/j.jallcom.2005.05.044 |
[67] |
Elanski D, Lim J W, Mimura K, et al. Impurity removal from Fe, Cr, Ti, and V metals by hydrogen plasma arc melting and thermodynamic estimation of hydride and sulfide formation[J]. Journal of Alloys and Compounds, 2006, 421(1/2): 209-216.
doi: 10.1016/j.jallcom.2005.09.080 |
[68] |
Lim J W, Choi G S, Mimura K, et al. Purity evaluation of Ta metal refined by Ar/Ar-H$_2$ plasma arc melting[J]. Metals and Materials International, 2008, 14(4): 539-543.
doi: 10.3365/met.mat.2008.08.539 |
[69] |
Lim J W, Kim M S, Munirathnam N R, et al. Effect of Ar/Ar-H$_2$ plasma arc melting on Cu purification[J]. Materials Transactions, 2008, 49(8): 1826-1829.
doi: 10.2320/matertrans.MRA2008054 |
[70] |
Lim J W, Mimura K, Miyawaki D, et al. Hydrogen effect on refining of Mo metal by Ar-H$_2$ plasma arc melting[J]. Materials Letters, 2010, 64(21): 2290-2292.
doi: 10.1016/j.matlet.2010.07.067 |
[71] |
Mimura K, Lim J W, Oh J M, et al. Refining effect of hydrogen plasma arc melting on titanium sponges[J]. Materials Letters, 2010, 64(3): 411-414.
doi: 10.1016/j.matlet.2009.11.033 |
[72] |
Mimura K, Matsumoto K, Isshiki M. Purification of hafnium by hydrogen plasma arc melting[J]. Materials Transactions, 2011, 52(2): 159-165.
doi: 10.2320/matertrans.M2010296 |
[73] |
Dong F Y, Su Y Q, Luo L S, et al. Deoxidation of bulk metallic glasses by hydrogen arc melting[J]. Materials Letters, 2012, 83: 1-3.
doi: 10.1016/j.matlet.2012.05.101 |
[74] |
Oh J M, Roh K M, Lim J W. Brief review of removal effect of hydrogen-plasma arc melting on refining of pure titanium and titanium alloys[J]. International Journal of Hydrogen Energy, 2016, 41(48): 23033-23041.
doi: 10.1016/j.ijhydene.2016.09.082 |
[75] | 刘亮, 钱梦浩, 余建波, 等. 氢等离子体电弧熔炼对稀土金属 Gd 凝固组织和硬度的影响[J]. 上海金属, 2021, 43(4): 87-91. |
[76] |
Guo X L, Yu J B, Hou Y, et al. Manganese removal from liquid nickel by hydrogen plasma arc melting[J]. Materials, 2018, 12(1): 33.
doi: 10.3390/ma12010033 |
[77] | 何梦园, 董福宇, 张悦, 等. 高熔点金属氢氩等离子弧纯化研究[J]. 稀有金属, 2019, 43(4): 402-408. |
[78] | 李国玲, 李里, 郭恒, 等. 等离子体电弧熔炼法对金属铽中碳含量的影响[J]. 高电压技术, 2015, 41(9): 2925-2929. |
[79] | 李国玲, 田丰, 李里, 等. 氢等离子体电弧熔炼技术制备高纯稀土功能材料钆[J]. 材料保护, 2013, 46(增刊2): 25-27. |
[80] | 傅凯, 李栓, 姜晓静, 等. 稀土金属脱除氧杂质的新技术及驱动机制研究进展[J]. 工程科学学报, 2018, 40(11): 1300-1308. |
[81] | 吴宏超, 袁浩, 魏佳明, 等, 增材制造在燃气轮机研发及生产中的应用[J]. 航空动力, 2020(2): 26-27. |
[82] |
DebRoy T, Wei H L, Zuback J S, et al. Additive manufacturing of metallic components: process, structure and properties[J]. Progress in Materials Science, 2018, 92: 112-224.
doi: 10.1016/j.pmatsci.2017.10.001 |
[83] |
Hosseini E, Popovich V A. A review of mechanical properties of additively manufactured Inconel 718[J]. Additive Manufacturing, 2019, 30: 100877.
doi: 10.1016/j.addma.2019.100877 |
[84] | 陈晓燕, 肖旅, 余建波, 等. 高温合金空心叶片用陶瓷型芯概述[J]. 铸造, 2016, 65(9): 868-873. |
[85] | 陈超越, 殷宇豪, 徐松哲, 等. 航空发动机叶片用陶瓷型芯的光固化增材制造研究现状[J]. 航空制造技术, 2022, 65(1/2): 67-76. |
[86] |
Liu X Y, Zou B, Xing H Y, et al. The preparation of ZrO$_2$-Al$_2$O$_3$ composite ceramic by SLA-3D printing and sintering processing[J]. Ceramics International, 2020, 46(1): 937-944.
doi: 10.1016/j.ceramint.2019.09.054 |
[87] | 占红星, 芦刚, 严青松, 等. SiO$_2$ 基陶瓷型芯高温性能强化的研究现状[J]. 特种铸造及有色合金, 2020, 40(7):749-753 |
[88] | 田国利. 硅基陶瓷型芯方石英含量与叶片浇注不露芯率的关系[J]. 材料工程, 1995 (7):33-35. |
[89] | 康海峰, 李飞, 赵彦杰, 等. 高温合金空心叶片精密铸造用陶瓷型芯与型壳的研究现状[J]. 材料工程, 2013(8): 85-90. |
[90] | Badev A, Abouliatim Y, Chartier T, et al. Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography[J]. Journal of Photochemistry & Photobiology A Chemistry, 2011, 222(1): 117-122. |
[91] |
Zheng W, Wu J M, Chen S, et al. Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration[J]. Additive Manufacturing, 2021, 48: 102396.
doi: 10.1016/j.addma.2021.102396 |
[92] | 任虔弘, 陈超越, 卢战军, 等. 激光选区熔化制备镍钛合金的研究进展[J]. 材料研究与应用, 2021, 15(3): 276-286. |
[93] |
Wang R, Chen C, Liu M, et al. Effects of laser scanning speed and building direction on the microstructure and mechanical properties of selective laser melted Inconel 718 superalloy[J]. Materials Today Communications, 2022, 30: 103095.
doi: 10.1016/j.mtcomm.2021.103095 |
[94] |
Wei H L, Mukherjee T, Zhang W, et al. Mechanistic models for additive manufacturing of metallic components[J]. Progress in Materials Science, 2021, 116: 100703.
doi: 10.1016/j.pmatsci.2020.100703 |
[95] |
Dezaki M L, Serjouei A, Zolfagharian A, et al. A review on additive/subtractive hybrid manufacturing of directed energy deposition (DED) process[J]. Advanced Powder Materials, 2022, 1(4): 100054.
doi: 10.1016/j.apmate.2022.100054 |
[96] |
Liu X, Yu J, Shuai S, et al. Cell-to-dendrite transition induced by a static transverse magnetic field during lasering remelting of the nickel-based superalloy[J]. Metallurgical and Materials Transactions B, 2018, 49(6): 3211-3219.
doi: 10.1007/s11663-018-1383-8 |
[97] |
Zhao R, Chen C, Shuai S, et al. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field[J]. Materials Research Letters, 2022, 10(8): 530-538.
doi: 10.1080/21663831.2022.2064195 |
[98] |
Zhu W, Yu S, Chen C, et al. Effects of static magnetic field on the microstructure of selective laser melted inconel 625 superalloy: numerical and experiment investigations[J]. Metals, 2021, 11: 1846.
doi: 10.3390/met11111846 |
[99] |
Nie J, Chen C, Shuai S, et al. Effect of static magnetic field on the evolution of residual stress and microstructure of laser remeltedinconel 718 superalloy[J]. Journal of Thermal Spray Technology, 2020, 29: 1410-1423.
doi: 10.1007/s11666-020-01039-0 |
[100] |
Wang X, Chen C, Zhao R, et al. Selective laser melting of carbon-free mar-M509 co-based superalloy: microstructure, micro-cracks, and mechanical anisotropy[J]. Acta Metallurgica Sinica (English Letters), 2021, 35: 501-516.
doi: 10.1007/s40195-021-01348-5 |
[101] | 刘龙涛, 陈超越, 李霞, 等. 激光增材制造单晶高温合金研究进展[J]. 精密成形工程, 2019, 11(4): 73-80. |
[102] | Chen C, Wang J, Liao H, et al. Laser additive manufacturing of single-crystal superalloy component: from solidification mechanism to grain structure control[M]// Cavaliere P. Laser cladding of metals. Cham, Switzerland: Springer International Publishing, 2021: 137-159. |
[103] |
Gäumann M, Bezençon C, Canalis P, et al. Single-crystal laser deposition of superalloys: processing--microstructure maps[J]. Acta Materialia, 2001, 49(6): 1051-1062.
doi: 10.1016/S1359-6454(00)00367-0 |
[104] | Nie J, Chen C, Liu L, et al. Effect of substrate cooling on the epitaxial growth of Ni-based single-crystal superalloy fabricated by direct energy deposition[J]. Journal of Materials Science & Technology, 2021, 62: 148-161. |
[105] |
Ramsperger M, Singer R F, Körner C. Microstructure of the nickel-base superalloy cmsx-4 fabricated by selective electron beam melting[J]. Metallurgical and Materials Transactions A, 2016, 47(3): 1469-1480.
doi: 10.1007/s11661-015-3300-y |
[106] |
Körner C, Ramsperger M, Meid C, et al. Microstructure and mechanical properties of CMSX-4 single crystals prepared by additive manufacturing[J]. Metallurgical and Materials Transactions A, 2018, 49(9): 3781-3792.
doi: 10.1007/s11661-018-4762-5 |
[107] |
Meid C, Dennstedt A, Ramsperger M, et al. Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting[J]. Scripta Materialia, 2019, 168: 124-128.
doi: 10.1016/j.scriptamat.2019.05.002 |
[1] | 丁莉, 满孝颖, 解维华, 张宇民, 曹海琳, 梁小林. 双锥构型三维点阵材料压缩特性[J]. 上海大学学报(自然科学版), 2020, 26(1): 76-84. |
[2] | 王雷, 陆金桂, 李乐为. 叶片疲劳寿命神经网络近似计算模型数值实验[J]. 上海大学学报(自然科学版), 2019, 25(6): 870-878. |
[3] | 赵登科, 玄伟东, 刘利俊, 兰健, 任忠鸣. 硅酸锆含量对硅基陶瓷型芯性能的影响[J]. 上海大学学报(自然科学版), 2019, 25(4): 453-461. |
[4] | 徐子烨, 玄伟东, 张金垚, 任忠鸣, 王欢,马晨凯, 杨帆, 余建波, 李传军. 烧结温度和粒度分布对多孔氧化硅陶瓷型芯材料性能的影响[J]. 上海大学学报(自然科学版), 2015, 21(1): 28-37. |
[5] | 刘钱, 任忠鸣, 钟华, 李传军, 余建波. α-Al磁性对强磁场下Al-Cu亚共晶合金定向凝固组织的影响[J]. 上海大学学报(自然科学版), 2014, 20(4): 472-479. |
[6] | 孙 涛, 陈红勋, 朱 兵, 张维勇. 缝隙引流叶轮的优化设计[J]. 上海大学学报(自然科学版), 2014, 20(2): 207-213. |
[7] | 李随波1,魏培茹2,陈红勋1. 缝隙引流叶片对低比转速离心泵性能的影响[J]. 上海大学学报(自然科学版), 2012, 18(4): 396-400. |
[8] | 魏培茹;陈红勋;路为. 全调节轴流泵叶片的受力特[J]. 上海大学学报(自然科学版), 2007, 13(3): 314-319 . |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||