轴流泵内部流动数值模拟中湍流模式可用性的研究

上海大学学报(自然科学版)

轴流泵内部流动数值模拟中湍流模式可用性的研究

施法佳，陈红勋

上海大学上海市应用数学和力学研究所，上海 200072

收稿日期:2005-09-08 修回日期:1900-01-01 出版日期:2006-06-30 发布日期:2006-06-30
通讯作者: 陈红勋

Applicability of Turbulent Models in Simulation of Internal Flow within Axial Flow Pump

SHI Fa-jia,CHEN Hong-xun

Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 200072, China

Received:2005-09-08 Revised:1900-01-01 Online:2006-06-30 Published:2006-06-30
Contact: CHEN Hong-xun

摘要/Abstract

摘要：

轴流泵内部流动是复杂的湍流流动.基于RANS方程，采用Standard kε、RNGkε和Realizable kε 3种湍流模型，对ns=1000的模型轴流泵在不同工况下的内部流动进行了三维湍流数值模拟.计算了水泵的扬程和效率，并与试验值进行了对比和分析.计算结果表明，在水泵运行的高效段，3种湍流模型计算扬程的相对误差不大于4%，偏离最优工况时不同湍流模式表现出不同的特性.

关键词: 内部流动, 数值模拟, 湍流模式, 轴流泵

Abstract:

The internal flow within axial flow pump is a complicated turbulent flow. Based on the 3D RANS equations, the standard kε, RNG kε and realizable kε turbulent models are used in 3D numerical simulation of the interior flow within an axial flow pump with the specific speed equal to 1 000 under different operating conditions. The head and efficiency of axial flow pump are calculated and compared with experimental data. Relative errors between the calculated heads derived from different models and the experimental heads on high efficient zones of the pump are less than 4%. Different models have different characteristics deviated from optimal operating conditions.

Key words: internal flow, numerical simulation, turbulent model, axial flow pump

施法佳;陈红勋. 轴流泵内部流动数值模拟中湍流模式可用性的研究[J]. 上海大学学报(自然科学版).

SHI Fa-jia;CHEN Hong-xun. Applicability of Turbulent Models in Simulation of Internal Flow within Axial Flow Pump[J]. Journal of Shanghai University（Natural Science Edition）.

[1]	唐慧1, 陈红勋1,2, 张睿1. 提高小流量工况下轴流泵的效率[J]. 上海大学学报(自然科学版), 2013, 13(5): 545-550.
[2]	郭宪军,陈红勋,朱兵. 离心泵启动过程的数值模拟[J]. 上海大学学报(自然科学版), 2012, 18(3): 288-292.
[3]	余运超,张伟,陈红勋. 轴流泵模型汽蚀特性的数值模拟[J]. 上海大学学报(自然科学版), 2011, 17(5): 653-656.
[4]	米晓庆, 朱杰江. 挤扩支盘桩的数值模拟及变刚度调平应用[J]. 上海大学学报(自然科学版), 2011, 17(3): 325-330.
[5]	梁雪杰陈红勋魏培茹. 轴流泵装置的数值实验分析[J]. 上海大学学报(自然科学版), 2009, 15(2): 160-163.
[6]	魏培茹;陈红勋;路为. 全调节轴流泵叶片的受力特[J]. 上海大学学报(自然科学版), 2007, 13(3): 314-319 .
[7]	张计光;陈红勋;马峥;施法佳;魏培茹. 双吸泵内流场的三维数值模拟及流动分析[J]. 上海大学学报(自然科学版), 2006, 12(2): 186-190 .