芳砜纶纤维/聚四氟乙烯复合材料的性能

doi:10.3969/j.issn.1007-2861.2015.05.017

上海大学学报(自然科学版) ›› 2017, Vol. 23 ›› Issue (2): 185-191.doi: 10.3969/j.issn.1007-2861.2015.05.017

芳砜纶纤维/聚四氟乙烯复合材料的性能

刘立起, 王旭, 谢旺, 俞鸣明, 方琳, 李红, 杨敏, 肖依, 任慕苏, 孙晋良

上海大学复合材料研究中心, 上海 200072

收稿日期:2016-01-06 出版日期:2017-04-30 发布日期:2017-04-30
通讯作者: 俞鸣明(1984—), 男, 博士, 研究方向为复合材料. E-mail: mmyu@shu.edu.cn
作者简介:俞鸣明(1984—), 男, 博士, 研究方向为复合材料. E-mail: mmyu@shu.edu.cn
基金资助:
科技部对俄合作资助项目(2014DFR50460); 上海市青年教师培养资助项目(37011015209)

Properties of polysulfonamide fiber (PSAF)/polytetrafluoroethylene (PTFE) composites

LIU Liqi, WANG Xu, XIE Wang, YU Mingming, FANG Lin, LI Hong, YANG Min, XIAO Yi, REN Musu, SUN Jinliang

Research Center for Composite Materials, Shanghai University, Shanghai 200072, China

Received:2016-01-06 Online:2017-04-30 Published:2017-04-30

摘要/Abstract

摘要：

采用热压工艺制备芳砜纶纤维(polysulfonamide fiber, PSAF)/聚四氟乙烯(polytetrafluoroethylene, PTFE)复合材料, 然后采用热重分析仪(thermal gravimetric analyzer, TGA)、差示扫描量热(differential scanning calorimetry, DSC)法、X射线衍射(X-ray diffraction, XRD)、傅里叶转换红外(Fourier transform infrared, FTIR)、热场发射扫描式电子显微镜(thermal field scanning electron microscope, TFSEM)等方法研究了PSAF对所制备复合材料的力学性能、热稳定性、结构和微观形貌等的影响. 研究结果表明, PSAF 的加入提高了复合材料的力学性能, 使其具有优异的热稳定性能. 适量的PSAF较好地分散在PTFE基体中, PSAF 与PTFE 基体的界面结合较好, 且同时存在物理与化学结合.

关键词: 结构表征, 聚四氟乙烯(polytetrafluoroethylene, PTFE) , 力学性能 , 热稳定性, 芳砜纶纤维(polysulfonamide fiber, PSAF)

Abstract:

Polysulfonamide fiber (PSAF)/polytetrafluoroethylene (PTFE) composites were prepared by hot pressing process. The effect of PSAF on material mechanical properties, thermal stability, structure and morphology was studied with thermal gravimetric analyzer(TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and thermal field scanning electron microscope (TFSEM). The results show that PSAF can improve mechanical properties of the composite materials, and the composites have good thermal stability. A moderate amount of PSAF can be well dispersed in the PTFE matrix. Bonding of the PSAF and PTFE matrix interfacial is good, and there is a physical adhesion.

Key words: mechanical property , polytetrafluoroethylene (PTFE) , structure characterization, thermal stability , polysulfonamide fiber (PSAF)

刘立起, 王旭, 谢旺, 俞鸣明, 方琳, 李红, 杨敏, 肖依, 任慕苏, 孙晋良. 芳砜纶纤维/聚四氟乙烯复合材料的性能[J]. 上海大学学报(自然科学版), 2017, 23(2): 185-191.

LIU Liqi, WANG Xu, XIE Wang, YU Mingming, FANG Lin, LI Hong, YANG Min, XIAO Yi, REN Musu, SUN Jinliang. Properties of polysulfonamide fiber (PSAF)/polytetrafluoroethylene (PTFE) composites[J]. Journal of Shanghai University（Natural Science Edition）, 2017, 23(2): 185-191.

参考文献

[1] Unal H, Sen U, Mimarogul A. An approach to friction and wear properties of polytetrafluoroethylene composite [J]. Materials & Design, 2006, 27(8): 694-699.
[2] Shangguan Q Q, Cheng X H. Investigation on mechanism of the improvement in tribological properties of carbon fiber reinforced polytetrafluoroethylene composites by surface treatment [J]. Journal of Shanghai Jiaotong University (Science), 2011, 17(4): 1-4.
[3] Shi Y J, Feng X, Wang H Y, et al. Effects of filler crystal structure and shape on the tribological properties of PTFE composites [J]. Tribology International, 2007, 40(7): 1195-1203.
[4] 张招柱, 曹佩弦, 王坤, 等. PTFE 复合材料的摩擦学性能及力学性能[J]. 高分子材料科学与工程, 2005, 21(2): 189-192.
[5] 康克家, 杜三明, 张永振, 等. PTFE 复合材料摩擦及改性研究综述[J]. 润滑与密封, 2012, 37(6): 99-102.
[6] Ye S J, Zeng X G. Tribological properties of PTFE and PTFE composites at different temperautures[J]. Tribology Transactions, 2014, 57(3): 382-386.
[7] Lee J Y, Lim D P, Lim D S. Tribological behavior of PTFE nanocomposite films reinforced with carbon nanoparticles [J]. Compsites Part B: Engineering, 2007, 38(7): 810-816.
[8] 张招柱, 薛群基, 刘维民, 等. 纤维及晶须增强PTFE复合材料的摩擦磨损性能研究[J]. 高分子材料科学与工程, 2001, 17(4): 90-93.

[9] Odochian L, Moldoveanu C, Maftei D. TG-FTIR study on thermal degradation mechanism of PTFE under nitrogen atmosphere and in air. Influence of the grain size [J]. Thermochinica Acta, 2014, 598: 28-35.
[10] Panas A J, Cudzilo S. Complementary DSC and dilatometric investigation of M-PTEF pyrotechnic composition [J]. Journal of Thermal Analysis and Calorimetry, 2004, 77(1): 329-340.
[11] Jin Z L, Chen X T, Wang Y Q, et al. Thermal conductivity of PTFE composites filled with graphite particles and carbon fibers [J]. Computational Materials Science, 2015, 102: 45-50.
[12] Ignat’eva L N, Buznik V M. IR-spectroscopic examination of polytetrafluoroethylene and its modified forms [J]. Russian Journal of General Chemistry, 2009, 79(3): 677-685.
[13] Lü M, Zheng F, Wang Q H, et al. Surface structural changes, surface energy and antiwear properties of polytetrafluoroethylene induced by proton irradiation [J]. Materials & Design, 2015, 85: 162-168.
[14] Cozad M J, Grant D A, Bachman S L, et al. Materials characterization of explanted polypropylene, polyethylene terephthalate, and expanded polytetrafluorethylene composites: spectral and thermal analysis [J]. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2010, 94(2): 455-462.
[15] Li H L, Yin Z W, Dan J, et al. A study of tribological behavior of transfer films of PTFE composites formed under different loads, speeds and morphologies of the counterface [J]. Wear, 2015, 328: 17-27.
[16] Wang Z H, Shen H G. Tensile behavior of polysulfonamide fiber after chemical treatment [J]. Energy Procedia, 2012, 16: 432-437.
[17] 孙淑香, 卢智敏, 石风俊, 等. 芳砜纶纤维结构和性能的研究[J]. 河南科学, 2013, 31(2): 161-164.
[18] 辛斌杰, 陈卓明, 吴湘济, 等. 聚砜酰胺/碳纳米管复合材料的热稳定性分析[J]. 材料导报, 2012, 26(16): 31-34.

芳砜纶纤维/聚四氟乙烯复合材料的性能

Properties of polysulfonamide fiber (PSAF)/polytetrafluoroethylene (PTFE) composites

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价