上海大学学报(自然科学版) ›› 2015, Vol. 21 ›› Issue (5): 657-662.doi: 10.3969/j.issn.1007-2861.2014.05.007

• 材料科学与工程 • 上一篇    下一篇

HgI2探测器的共面栅电极设计及有限元模拟优化

陆舒逸, 李冬梅, 杨伟光, 黄璐, 金晶, 王晨, 陈阳, 史伟民   

  1. 上海大学 材料科学与工程学院, 上海 200072
  • 收稿日期:2014-11-25 出版日期:2015-10-30 发布日期:2015-10-30
  • 通讯作者: 史伟民(1951—), 男, 研究员, 博士生导师, 研究方向为光电材料与器件. E-mail:wmshi@mail.shu.edu.cn

Coplanar-grid electrode design of HgI2 detector with finite element simulation and optimization

LU Shu-yi, LI Dong-mei, YANG Wei-guang, HUANG Lu, JIN Jing, WANG Chen, CHEN Yang, SHI Wei-min   

  1. School of Materials Science and Engineering, Shanghai University, Shanghai 200072, China
  • Received:2014-11-25 Online:2015-10-30 Published:2015-10-30

摘要: 多晶碘化汞膜正逐渐成为制备室温下X射线成像探测器的优异半导体材料. 设计8组不同栅宽和沟宽的共面栅探测器电极结构, 进而使用有限元软件ANSYS对其进行模拟分析,得到相应的电势分布. 结果发现, 结构E(栅宽为150 μm, 沟宽为500 μm)的电极设计效果最佳. 之后, 进一步设计了2组电极结构, 用以研究在不对称电极形状所导致的边缘效应影响下的电势分布, 结果发现通过加宽边缘第二个栅极(结构N)可以实现优化共面栅电极设计的目的, 从而降低边缘效应产生的影响.

关键词: 多晶HgI2, 共面栅探测器, 有限元分析

Abstract: Polycrystalline mercuric iodide films are developed as new detectors in room temperature X-ray imaging. In this paper, 8 different electrode patterns are designed by varying the widths of grid and gap. Finite element analysis is used to simulate the potential distribution of the coplanar-grid detectors. The electrode design of pattern E, with width of grid 150 μm and width of gap 500 μm, is the best. The influence of edge effects resulting from the unsymmetrical electrodes on the potential distribution is discussed. The geometry of electrodes for coplanar-grid detectors is optimized by widening the second grids near edges as shown in pattern N.

Key words: coplanar-grid detector, finite element analysis (FEA), polycrystalline HgI2

中图分类号: