[1] Jin Z M, Stone M, Ingham E, et al. Biotribology [J]. Current Orthopaedics, 2006, 20(1): 32-40.[2] Hua Z K, Zhang J H. A new simulator for bio-tribological study [J]. Journal of Bionic Engineering, 2008, 5: 143-147.[3] Korduba L A, Wang A. The effect of cross-shear on the wear of virgin and highly-crosslinked polyethylene [J]. Wear, 2011, 271(9/10): 1220-1223.[4] Hamilton M A, Sucec M C, Fregly B J, et al. Quantifying multidirectional sliding motions in total knee replacements [J]. J Tribol, 2005, 127(2): 280-286.[5] Bennett D, Humphreys L, Brien S O, et al. The influence of wear paths produced by hip replacement patients during normal walking on wear rates [J]. J Orthop Res, 2008, 26(9): 1210-1217.[6] Davey S M, Orr J F, Buchanan F J, et al. Measurement of molecular orientation in retrieved ultra-high-molecular-weight polyethylene (UHMWPE) hip sockets using Fourier-transform infrared spectro-scopy [J]. Strain, 2004, 40(4): 203-210.[7] Dunn A C, Steffens J G, Burris D L, et al. Spatial geometric effects on the friction coefficients of UHMWPe [J]. Wear, 2007, 264(7/8): 648-653.[8] Saikko V. A hip wear simulator with 100 test stations [J]. J Engineering in Medicine, 2005, 219(5): 309-319.[9] Saikko V. Random POD: a new method and device for advanced wear simulation of orthopaedic biomaterials [J]. Journal of Biomechanics, 2011, 44(5): 810-814.[10] Calonius O, Saikko V. Analysis of relative motion between femoral head and acetabular cup and advances in computation of the wear factor for the prosthetic hip joint [J]. Acta Polytechnica, 2003, 43(4): 43-54.[11] Laurent M P, Johnson T S, Yao J Q, et al. In vitro lateral versus medial wear of a knee prosthesis [J]. Wear, 2003, 255: 1101-1106.[12] Hua Z K, Zhang J H. Axiomatic design of a multi-directional motion pin on disk apparatus for biotribology study [C]//Proceedings of the STLE/ASME International Joint TribologyConference. 2010: 37-39.[13] Hua Z K, Fan Y W, Jin Z M. A biotribo-acoustic testing method for ceramic orthopaedic biomaterials [J]. Tribology International, 2014, 71: 1-6.[14] ASTM. ASTM standard F732-00, standard test method for wear testing of polymeric materials used in total joint prostheses [S]. West Conshohocken, PA: ASTM International, 2011. |