中文

Journal of Shanghai University >

2016 , Vol. 22 >Issue 6: 727 - 736

DOI: https://doi.org/10.3969/j.issn.1007-2861.2014.05.001

Optimization of milling parameters for pre-hardened plastic mould steel SDP1

Expand
  • 1. School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China;
    2. Shanghai Huizhong Automotive Manufacturing Corporation, Shanghai 200122, China

Received date: 2014-10-08

  Online published: 2016-12-30

Fold

Abstract

Milling parameters of a new pre-hardened plastic mould steel SDP1 were optimized using the Taguchi method and model analysis. The optimization model for rough milling was set up. Based on signal-to-noise ratio (SNR) and analysis of variance, influences of milling force, milling speed, feed rate and axial milling depth on the /Fn value were discussed. Optimal parameters were obtained and confirmed.

Key words：  milling;  optimization; plastic mould steel

Cite this article

LIU Liang1,2, MIN Yongan1, ZHANG Zheng1, WU Xiaochun1 . Optimization of milling parameters for pre-hardened plastic mould steel SDP1[J]. Journal of Shanghai University, 2016 , 22(6) : 727 -736 . DOI: 10.3969/j.issn.1007-2861.2014.05.001

References

[1] 罗毅, 吴晓春. 预硬型塑料模具钢的研究进展[J]. 金属热处理, 2007, 32(12): 22-25.
[2] Abou E H K A, Kadirgama K, Hamdi M. Prediction of cutting force in end-milling operation of modified AISI P20 tool steel [J]. Journal of Materials Processing Technology, 2007, 182: 241-247.
[3] Etory M A, Lincoln C B, Sérgio L M R F. Integrated optimization using mixture design to confirm the finishing of AISI P20 using different cutting strategies and ball nose end mills [J]. Measurement, 2014, 47: 54-63.
[4] Anil G, Hari S, Aman A. Taguchi-fuzzy multi output optimization (MOO) in high speed CNC turning of AISI P20 tool steel [J]. Expert Systems with Applications, 2011, 38: 6822-6828.
[5] 庞俊忠, 王敏杰, 段春争, 等. 高速铣削P20 和45 淬硬钢的切削力[J]. 中国机械工程, 2007, 18(21): 2543-2546.
[6] 杜劲, 刘战强. 材料切削加工性的综合评价方法[J]. 工具技术, 2010, 44(7): 3-6.
[7] 《正交试验法》编写组. 正交试验法[M]. 北京: 国防工业出版社, 1976: 1-119.
[8] Fu T, Liu W J, Zhao J B. Optimization of cutting parameters using multiobjective evolutionary algorithm based on decomposition [J]. Journal of Vibroengineering, 2013, 15(2): 833-844.
[9] 仇健, 李晓飞, 马晓波, 等. 硬质合金立铣刀高速铣削铝合金切削力实验研究[J]. 中国机械工程, 2012, 23(13): 1555-1560.
[10] Ghani J A, Choudhury I A, Hassan H H. Application of Taguchi method in the optimization of end milling parameters [J]. Journal of Materials Processing Technology, 2007, 182: 241-247.

Options
Outlines

/

〈 〉