no

Friction-Induced Nanofabrication of Small Line-Width Structure on Silicon Surface Based on Si3N4 Probe

Expand
  • Tribology Research Institute, National Traction Power Laboratory,Southwest Jiaotong University, Chengdu 610031, China

Received date: 2014-10-25

  Online published: 2014-12-23

Abstract

Talking into account limitations of traditional nanofabrication approaches such as complicated manipulation and high cost, a new friction-induced fabrication method is proposed. With the native oxidation layer as etching “mask”, nanofabrication of silicon can be achieved by scanning with a Si3N4 probe and subsequent selective etching in KOH solution. By optimization of the tip radius, the groove structure with small line-width can be realized on monocrystalline silicon surface. Then, etching time dependence of groove depth is investigated to determine the best etching time for fabricating nanostructure.Finally, the effect of applied load and number of sliding cycles on nanostructure fabrication is studied. As a maskless and simple method, the proposed nanofabrication approach makes possible to fabricate surface texture with special functions, micromechanical valves for fluidic manipulation, single-electron devices, etc. With these advantages and potential applications, the direct fabrication method provides opportunities for nanofabrication

Cite this article

YAO Yiang-Yiang, CHEN Lei, GUO Jian, JIAN Lin-Mao . Friction-Induced Nanofabrication of Small Line-Width Structure on Silicon Surface Based on Si3N4 Probe[J]. Journal of Shanghai University, 2014 , 20(6) : 669 -679 . DOI: 10.3969/j.issn.1007-2861.2014.04.006

References

[1] Carr D W, Sekaric L, Craighead H G. Measurement of nanomechanical resonant structures

in single-crystal silicon [J]. Journal of Vacuum Science & Technology B, 1998, 16: 3821-3824.

[2] Evoy S, Carr D W, Sekaric L, et al. Nanofabrication and electrostatic operation of singlecrystal

silicon paddle oscillators [J]. Journal of Applied Physics, 1999, 86: 6072-6077.

[3] Carr D W, Evoy S, Sekaric L, et al. Measurement of mechanical resonance and losses in

nanometer scale silicon wires [J]. Applied Physics Letters, 1999, 75: 920-922.

[4] Pepin A, Youinou P, Studer V, et al. Nanoimprint lithography for the fabrication of DNA

electrophoresis chips [J]. Microelectronic Engineering, 2002, 61(2): 927-932.

[5] Resnick D J, Dauksher W J, Mancini D, et al. Imprint lithography for integrated circuit

fabrication [J]. Journal of Vacuum Science & Technology B, 2003, 21(6): 2624-2631.

[6] Garnett E, Yang P D. Light trapping in silicon nanowire solar cells [J]. Nano Letters, 2010,

10: 1082-1087.

[7] 崔铮. 微纳米加工技术及其应用[M]. 3 版. 北京: 高等教育出版社, 2013.

[8] 王国彪. 纳米制造前言综述[M]. 北京: 科学出版社, 2009.

[9] Miyake S, Kim J. Fabrication of silicon utilizing mechanochemical local oxidation by diamond

tip sliding [J]. Japanese Journal of Applied Physics, 2001, 40(11B): 1247-1249.

[10] Miyake S, Kim J. Nanoprocessing of silicon by mechanochemical reaction using atomic force microscopy

and additional potassium hydroxide solution etching [J]. Nanotechnology, 2005, 16(1):

149-157.

[11] Ren S L, Yang S R, Zhao Y P. Micro- and macro-tribological study on a self-assembled duallayer

film [J]. Langmuir, 2003, 19: 2763-2767.

[12] Song C F, Li X Y, Yu B J, et al. Friction-induced nanofabrication method to produce protrusive

nanostructures on quartz [J]. Nanoscale Research Letters, 2011, 6: 310.

[13] Tang P, Yu B J, Guo J, et al. Maskless micro/nanofabrication on GaAs surface by frictioninduced

selective etching [J]. Nanoscale Research Letters, 2014, 9: 59.
[14] Yu B J, Dong H S, Qian L M, et al. Friction-induced nanofabrication on monocrystalline

silicon [J]. Nanotechnology, 2009, 20(46): 465303.

[15] Yu B J, Qian L M, Dong H S, et al. Friction-induced hillocks on monocrystalline silicon in

atmosphere and in vacuum [J]. Wear, 2010, 68: 1095-1102.

[16] Guo J, Song C F, Li X Y, et al. Fabrication mechanism of friction-induced selective etching on

Si(100) surface [J]. Nanoscale Research Letters, 2012, 7: 152.

[17] Guo J, Yu B J, Wang X D, et al. Nanofabrication on monocrystalline silicon through frictioninduced

selective etching of Si3N4 mask [J]. Nanoscale Research Letters, 2014, 9(1): 241.

[18] Ebrahimi F, Kalwani L. Fracture anisotropy in silicon single crystal [J]. Materials Science

and Engineering A: Structural Materials Properties Microstructure and Processing, 1999, 268:

116-126.

[19] Yu J X, Qian L M, Yu B J, et al. Effect of surface hydrophilicity on the nanofretting behavior

of Si(100) in atmosphere and vacuum [J]. Journal of Applied Physics, 2010, 108: 034314.

[20] Maw W, Stevens F, Langford S C, et al. Single asperity tribochemical wear of silicon nitride

studied by atomic force microscopy [J]. Journal of Applied Physics, 2002, 92(9): 5103-5109.

[21] Katsuki F. Single asperity tribochemical wear of silicon by atomic force microscopy [J]. Journal

of Materials Research, 2009, 24(l): 173-175.

[22] Mizuhara K, Hsu S M. Tribochemical reaction of oxygen and water on silicon surfaces [J].

Tribol Series, 1992, 21: 323-328.

[23] Beyer M K. The mechanical strength of a covalent bond calculated by density functional

theory [J]. Journal of Chemical Physics, 2000, 112(17): 7307-7312.

[24] Youn S W, Kang C G. Maskless pattern fabrication on Pyrex 7740 glass surface by using

nano-scratch with HF wet etching [J]. Scripta Materialia, 2005, 52(2): 117-122.

[25] Park J W, Lee S S, So B S, et al. Characteristics of mask layer on (100) silicon induced by

tribo-nanolithography with diamond tip cantilevers based on AFM [J]. Journal of Materials

Processing Technology, 2007, 187: 321-325.
Outlines

/