Experiments of simulated flue gas desulfurization (FGD) were carried out by using ethylene waste alkali liquor as absorbent. The influence of affecting factors including inlet gas temperature, oxygen content in flue gas, ratio of liquid to gas volume, SO2 concentration at the inlet of flue gas, and velocity of flue gas on the efficiency of flue gas desulfurization was studied. The economic benefit of this process technology used in a plant is analyzed. Experimental results show that desulfurization efficiency reached more than 95% of the process parameters: inlet flue gas temperature of 80~90 ℃, oxygen content of 5%~6% in flue gas, ratio of liquid to gas volume of 3.5 L/m3, flue gas velocity of 3.5~4.5 m/s. When ethylene waste alkali liquor concentration was 2.0% NaOH and 7.2% Na2CO3 or much more, the desulfurization efficiency is higher. In addition, ethylene waste alkali liquor had certain foaming tendency at low speeds of the flue gas.
CHAN Wen-bing, WAN Hao, SONG Gui-dong, GU Xiao-jing, WU Cheng-wu, LIN Zhi-li
. FGD Process Technology with Sodium Alkaline Method[J]. Journal of Shanghai University, 2013
, 19(5)
: 473
-478
.
DOI: 10.3969/j.issn.1007-2861.2013.05.007
[1] 邵申, 孙在柏, 万皓, 等. 氨法烟气脱硫技术的工艺研究[J]. 环境工程, 2011, 29(5): 71-74.
[2] 李玉兰. 钠碱法烟气脱硫盐析法结晶工艺开发[J]. 企业技术开发, 2009(11): 22-24.
[3] 张丽亚. 槽压对钠碱脱硫吸收液再生特性影响的研究[J]. 工业用水与废水, 2007(1): 55-57.
[4] Despina K, Marina P, Amedeo L, et al. Sulfite oxidation catalyzed by cobalt ions in flue gas desulfurization processes [J]. Air and Waste Management Association, 2010, 6(60): 675-680.
[5] 禾志强, 祁利明. 石灰石: 石膏湿法烟气脱硫优化运行[M]. 北京: 中国电力出版社, 2012.
[6] 田琼, 苏妮娜. 石灰石-石膏湿法烟气脱硫技术研究[J]. 内蒙古环境科学, 2009, 3(21): 70-74.
[7] 姜正雄, 魏宇. 燃煤电厂石灰石-石膏湿法烟气脱硫技术概述[J]. 装备机械, 2012(2): 60-65.
[8] 王峥. 石灰石-石膏湿法烟气脱硫效率影响因素[J]. 煤气与热力, 2011(9): 1-4.
[9] 丁红蕾. 石煤电厂氨-亚硫酸氢铵WFGD特性研究[J].煤炭学报, 2009(8): 1110-1114.
[10] Michal G. Technical description of parameters influencing the pH value of suspension absorbent used in flue gas desulfurization systems [J]. Air and Waste Management Association, 2010, 8(60): 1009-1016.
[11] 沈煜晖, 沈明忠, 陈学莹. 湿法烟气脱硫系统设计节能分析[J]. 华电技术, 2008(1): 66-69.
[12] 邹向群. 吸收塔浆液起泡原因分析及消泡剂的选择[J]. 电力科技与环保, 2012(4): 41-42.
[13] 吴林美, 杜龙弟, 李向富, 等. 乙烯废碱液再生回用的可行性研究[J]. 现代化工, 2006, 26(2): 350-352.
[14] 李卫清, 王慧, 刘国杰, 等. CeO2 对CuO/-Al2O3 分散及烟气脱硫性能的影响[J]. 上海大学学报: 自然科学版, 2010, 16(3): 297-301.
