This study investigates the role of carbon nanotube-modified phenolic resin as an organic carbon source in enhancing the electrical resistance properties of carbon ceramics. The microstructure of the carbon ceramic resistors was characterized using scanning electron microscopy (SEM), while the distribution of carbon elements within the ceramic was analyzed using energy-dispersive spectroscopy (EDS). The thermal stability was evaluated using a temperature coefficient of resistance (TCR) meter, and the voltage coefficient of resistance (VCR) and energy withstand capability were tested using a pulse voltage generator. The results indicate that the introduction of carbon nanotube-modified phenolic resin optimized the microstructure and properties of the composite material, improving both mechanical strength and thermal stability. The Young's modulus increased from 214 to 281 GPa, and the temperature coefficient of resistance decreased from $-2 252$$\times$10$^{-6}$ to $-873$$\times $10$^{-6}$/℃. The improved voltage coefficient of resistance decreased from $-1.06$ to $-0.32%$/(kV$\cdot$cm$^{-1}$), and the energy withstand capability increased from 200 to 450 J$\cdot$cm$^{-3}$.
HU Taishan
,
HU Shangmao
,
LIU Gang
,
MEI Qi
,
REN Xin
,
YAO Zheng
. Enhancement efiect of carbon nanotube modifled phenolic resin composite carbon source on electrical properties of carbon ceramics[J]. Journal of Shanghai University, 2025
, 31(5)
: 827
-835
.
DOI: 10.12066/j.issn.1007-2861.2704
[1] Angelovici M M, Bryant R G, Northam G B, et al. Carbon/ceramic microcomposites, preparation and properties [J]. Materials Letters, 1998, 36(5/6): 254-265.
[2] Manocha L M, Prasad G, Manocha S. Carbon-ceramic composites for friction applications [J]. Mechanics of Advanced Materials and Structures, 2014, 21(3): 172-180.
[3] 乔英杰, 尹海莲, 梁军. 基于人工神经网络的碳/陶瓷复合材料性能预测[J]. 东南大学学报(自然科学版), 2005, 35(3): 400-403.
[4] Reznik S V, Prosuntsov P V, Mikhailovskii K V. Development of elements of reusable heat shields from a carbon-ceramic composite material 1. theoretical forecast [J]. Journal of Engineering Physics and Thermophysics, 2019, 92(1): 89-94.
[5] 段行辉, 王浩, 周诗佳, 等. 不同碳填料及其添加量对碳陶瓷线性电阻结构及性能的影响[J]. 电瓷避雷器, 2025(1): 127-132.
[6] Kumar R, Bhargava P. Synthesis and characterization of low specific resistance alumina-claycarbon composites by colloidal processing using sucrose as a soluble carbon source for electrical applications [J]. RSC Advances, 2016, 6(11): 8705-8713.
[7] Menchavez R L, Fuji M, Takahashi M. Electrically conductive dense and porous alumina with in-situ-synthesized nanoscale carbon networks [J]. Advanced Materials, 2008, 20(12): 2345- 2351.
[8] 孙晋茹, 戴辉翔, 陈维, 等. 断路器碳陶瓷合闸电阻能量耐受及失效特性[J]. 高电压技术, 2024, 50(6): 2590-2600.
[9] 李树勋, 白玉, 陈维, 等. 成型密度对碳-陶瓷线性电阻性能的影响研究[J]. 电瓷避雷器, 2021(5): 176-180.
[10] 陈蕊, 李新刚, 郝留成, 等. 高压开关设备用碳-陶瓷电阻侧面高阻层釉浆制备工艺研究[J]. 绝缘材料, 2023, 56(4): 17-21.
[11] 陈蕊, 宋继光, 郝留成, 等. 高压开关设备用碳-陶瓷电阻片的混料工艺研究[J]. 高压电器, 2021, 57(11): 196-201.
[12] 尤万里, 任鑫, 余文琪, 等. 烧结温度及骨料粒径对陶瓷线性电阻性能的影响[J]. 电瓷避雷器, 2021(4): 215-220.
[13] Gardziella A, Suren J. Selection criteria for phenolic resins as binders and carbon-forming agents in refractory products [J]. Sprechsaal, 1988, 121(10): 945-947.
[14] Li Y, Sun Y, Yeow J T W. Study of ballasting carbon nanotube field emitter arrays with coaxial gate using doped silicon resistor [C]// IEEE 16th International Conference on Nanotechnology. 2016: 153-156.
[15] Ryu H, Kalblein D, Schmidt O G , et al. Unipolar sequential circuits based on individualcarbon-nanotube transistors and thin-film carbon resistors [J]. ACS Nano, 2011, 5(9): 7525-7531.
[16] Tan S, Yi J. Research status of carbon nanotubes reinforced ceramic composites [J]. Materials China, 2016, 35(12): 932-936.
[17] Koszor O, tapaszto L, Marko M , et al. Characterizing the global dispersion of carbon nanotubes in ceramic matrix nanocomposites [J]. Applied Physics Letters, 2008, 93(20): 201910.
