中文

Journal of Shanghai University >

2020 , Vol. 26 >Issue 1: 76 - 84

DOI: https://doi.org/10.12066/j.issn.1007-2861.1983

Research Articles

Compression properties of 3D dual-pyramid lattice materials

Expand
  • 1. Science and Technology on Advanced Composites in Special Environment Laboratory, Harbin Institute of Technology, Harbin 150001, China
    2. Advanced Materials Research Institute, Shenzhen Academy of Aerospace Technology, Shenzhen 518057, Guangdong, China
    3. Shanghai Institute of Satellite Engineering, Shanghai 201109, China

Received date: 2017-12-13

  Online published: 2020-03-22

Fold

Abstract

The compression properties of the dual-pyramid lattice materials consisting of resin hollow tubes were studied and compared with those of the homogeneous materials. Specimens of lattice materials and homogeneous materials were fabricated using multi nozzle plastic additive manufacturing technology. The compression properties of homogeneous materials and lattice materials of two cellular sizes were tested. The compression stress-strain curves of different strain rates were obtained. The effects of geometry size of unit cell and strain rate were researched. The equations for predicting the stress-strain relations before material failures were obtained by fitting experimental data. The stress prediction results agree with the experimental results. The research results show that the cellular size significantly affects the compressive properties of lattice materials. The yield strain changed little under different strain rates, and the yield strength difference is relatively large. The yield strain of the presented lattice materials is greater than that of the homogeneous resin materials, and the yield strength is not greater than that of the homogeneous resin materials.

Key words： lattice material; dual-pyramid; compression properties; strain rate; additive manufacture

Cite this article

Li DING, Xiaoying MAN, Weihua XIE, Yumin ZHANG, Hailin CAO, Xiaolin LIANG . Compression properties of 3D dual-pyramid lattice materials[J]. Journal of Shanghai University, 2020 , 26(1) : 76 -84 . DOI: 10.12066/j.issn.1007-2861.1983

References

[1] Wadley H N G . Multifunctional periodic cellular metals[J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006,364(1838):31-68.
[2] Hohe J, Becker W . Effective elastic properties of triangular grid structures[J]. Composite Structures, 1999,45(2):131-145.
[3] Schaedler T A, Carter W B . Architected cellular materials[J]. Annu Rev Mater Res, 2016,46(1):187-210.
[4] Fleck N A, Deshpande V S, Ashby M F . Micro-architectured materials: past, present and future[J]. Proc R Soc Land A, 2010,466:2495-2516.
[5] Schaedler T A, Jacobsen A J, Carter W B . Toward lighter, stiffer materials[J]. Science, 2013,341(6151):1181-1182.
[6] 高燕, 周永风, 杨青林 , 等. 超轻材料[J]. 化学进展, 2015,27(12):1714-1721.
[6] Gao Y, Zhou Y F, Yang Q L , et al. Ultralight materials[J]. Progress in Chemistry, 2015,27(12):1714-1721.
[7] Lewandowski J J, Seifi M . Metal additive manufacturing: a review of mechanical properties[J]. Annu Rev Mater Res, 2016,46(1):151-186.
[8] 卢天建, 徐峰, 文婷 . 周期性多孔金属材料的热流性能[M]. 北京: 科学出版社, 2010: 2-7.
[9] 方岱宁, 张一慧, 崔晓东 . 轻质点阵材料力学与多功能设计[M]. 北京: 科学出版社, 2009: 10-17.
[10] Schaedler T A, Jacobsen A J, Torrents A , et al. Ultralight metallic microlattices[J]. Science, 2011,334(6058):962-965.
[11] Zheng X, Lee H, Weisgraber T H , et al. Ultralight, ultrastiff mechanical metamaterials[J]. Science, 2014,344(6190):1373-1377.
[12] Zheng X Y, Smith W, Jackson J , et al. Multiscale metallic metamaterials[J]. Nature Materials, 2016,15(10):1100-1106.
[13] Wallach J C, Gibson L J . Mechanical behavior of a three-dimensional truss material[J]. International Journal of Solids and Structures, 2001,38(40/41):7181-7196.
[14] Schaedler T A, Ro C J, Sorensen A E , et al. Designing metallic microlattices for energy absorber applications[J]. Advanced Engineering Materials, 2014,16(3):276-283.
[15] Evans A G . Lightweight materials and structures[J]. Mater Res Bull, 2001,26(10):790-797.
[16] Evans A G, Hutchinson J W, Fleck N A , et al. The topological design of multifunctional cellular metals[J]. Progress in Materials Science, 2001,46(3):309-327.
[17] Yin S, Li J N, Liu B H , et al. Honeytubes: hollow lattice truss reinforced honeycombs for crushing protection[J]. Composite Structures, 2017,160:1147-1154.
[18] Deshpande V S, Fleck N A, Ashby M F . Effective properties of the octet-truss lattice material[J]. Journal of the Mechanics and Physics of Solids, 2001,49(8):1747-1769.
[19] 范华林, 杨卫 . 轻质高强点阵材料及其力学性能研究进展[J]. 力学进展, 2007,37(1):99-112.
[19] Fan H L, Yang W . Development of lattice materials with high specific stiffness and strength[J]. Advances in Mechanics, 2007,37(1):99-112.
[20] 吴林志, 熊健, 马力 , 等. 新型复合材料点阵结构的研究进展[J]. 力学进展, 2012,42(1):41-67.
[20] Wu L Z, Xiong J, Ma L , et al. Processes in the study on novel composite sandwich panels with lattice truss cores[J]. Advances in Mechanics, 2012,42(1):41-67.
[21] Li M, Wu L Z, Ma L , et al. Mechanical response of all-composite pyramidal lattice truss core sandwich structures[J]. Journal of Materials Science & Technology, 2011,27(6):570-576.
Options
Outlines

/

〈 〉