中文

Journal of Shanghai University >

2020 , Vol. 26 >Issue 6: 937 - 944

DOI: https://doi.org/10.12066/j.issn.1007-2861.2168

Research Articles

Effects of electron beam irradiation on microstructures and thermoelectric power factors of β-Zn4Sb3 thin films

Expand
  • School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

Received date: 2018-05-13

  Online published: 2019-07-05

Fold

Abstract

In this study, β-Zn4Sb3 thermoelectric thin films were fabricated by radio-frequency magnetron sputtering with subsequent electron beam (EB) irradiation with different doses of 0~800 kGy and thermal annealing. The microstructures and surface morphologies of the films were characterised by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). The electrical transport and thermoelectric properties of the films were analysed by Hall effect and Seebeck effect measurements. All samples exhibited p-type conduction characteristics. The phase compositions and average grain sizes of the samples subjected to EB irradiation slightly changed, the film surface was more densely compacted, and the grain growth exhibited a preferred orientation along the (223) crystallographic plane. When the EB irradiation dose was 200 kGy, the power factor of the sample reached 6.90 μW/(cm·K2) as the Seebeck coefficient was effectively increased while the conductivity was slightly reduced. This power factor was increased by 41.7% compared to that of the sample without EB irradiation.

Key words： thermoelectric; β-Zn4Sb3 thin film; magnetron sputtering; electron beam irradiation; power factor

Cite this article

GAO Pengfei, OU Zhenghai, QIN Juan, SHI Weimin, WANG Linjun . Effects of electron beam irradiation on microstructures and thermoelectric power factors of β-Zn4Sb3 thin films[J]. Journal of Shanghai University, 2020 , 26(6) : 937 -944 . DOI: 10.12066/j.issn.1007-2861.2168

References

[1] Altenkirch E. Elektrothermische K?lteerzeugung und reversible elektrische Heizung[J]. Physikalische Zeitschrift, 1911,12:920-924.
[2] Hu L, Zhu T, Liu X, et al. Point defect engineering of high-performance Bismuth-Telluride-based thermoelectric materials[J]. Advanced Functional Materials, 2014,24(33):5211-5218.
[3] Zhai R S, Wu Y H, Zhu T J, et al. Thermoelectric performance of p-type zone-melted Se-doped Bi$_{0.5}$Sb$_{1.5}$Te$_{3}$ alloys[J]. Rare Metals, 2018,37(4):308-315.
[4] 张骐昊, 徐磊磊, 王连军, et al. Se掺杂量对n型Bi$_{2}$Te$_{3-x}$Se$_{x}$微结构及热电性能的影响[J]. 无机材料学报, 2014,29(11):1139-1144.
[5] Pei Y, Lalonde A D, Wang H, et al. Low effective mass leading to high thermoelectric performance[J]. Energy and Environmental Science, 2012,5(7):7963-7969.
[6] Qin B C, Xiao Y, Zhou Y M, et al. Thermoelectric transport properties of Pb-Sn-Te-Sesystem[J]. Rare Metals, 2018,37(4):343-350.
[7] Slack G A, Hussain M A. The maximum possible conversion efficiency of silicon-germanium thermoelectric generators[J]. Journal of Applied Physics, 1991,70(5):2694-2718.
[8] Vining C B, Laskow W, Hanson J O, et al. Thermoelectric properties of pressure-sintered Si$_{0.8}$Ge$_{0.2}$ thermoelectric alloys[J]. Journal of Applied Physics, 1991,69(8):4333-4340.
[9] Mayer H, Mikhail I, Schubert K. über einige phasen der Mischungen ZnSbN undCdSbN[J]. Journal of the Less Common Metals, 1978,59(1):43-52.
[10] Tapiero M, Tarabichi S, Gies J, et al. Preparation and characterization of Zn$_{4}$Sb$_{4}$[J]. Solar Energy Materials, 1985,12(4):257-274.
[11] Yang J, Liu G, Shi Z, et al. An insight into $\beta $-Zn$_{4}$Sb$_{3}$ from its crystal structure, thermoelectric performance, thermal stability and graded material[J]. Materials Today Energy, 2017,3:72-83.
[12] Meldrum A, Boatner L, Ewing R. Electron-irradiation-induced nucleation and growth in amorphous LaPO$_{4}$, ScPO$_{4}$, and zircon[J]. Journal of Materials Research, 1997,12(7):1816-1827.
[13] Zhang T, Song Z, Sun M, et al. Investigation of electron beam induced phase change in Si$_{2}$Sb$_{2}$Te$_{5}$ material[J]. Applied Physics A, 2008,90(3):451-455.
[14] Qin W, Szpunar J, Umakoshi Y. Electron or ion irradiation-induced phase-change mechanism between amorphous and crystalline state[J]. Acta Materialia, 2011,59(5):2221-2228.
[15] Takashiri M, Imai K, Uyama M, et al. Effects of homogeneous irradiation of electron beam on crystal growth and thermoelectric properties of nanocrystalline bismuth selenium telluride thin films[J]. Journal of Alloys and Compounds, 2014,612:98-102.
[16] Takashiri M, Hamada J. Bismuth antimony telluride thin films with unique crystal orientation by two-step method[J]. Journal of Alloys and Compounds, 2016,683:276-281.
[17] Zeng Z, Yang P, Hu Z. Temperature and size effects on electrical properties and thermoelectric power of Bismuth Telluride thin films deposited by co-sputtering[J]. Applied Surface Science, 2013,268:472-476.
[18] Swapna R, Kumar M S. Growth and characterization of molybdenum doped ZnO thin films by spray pyrolysis[J]. Journal of physics and chemistry of solids, 2013,74(3):418-425.
[19] Medjani F, Sanjines R, Allidi G, et al. Effect of substrate temperature and bias voltage on the crystallite orientation in RF magnetron sputtered AlN thin films[J]. Thin Solid Films, 2006,515(1):260-265.
[20] Ba L, Qin Y, Wu Z. Electron beam induced crystallization of a Ge-Au amorphous film[J]. Journal of Applied Physics, 1996,80(11):6170-6174.
[21] Das V D, Lakshmi P J. Electron-beam-induced `explosive' crystallization of amorphous Se$_{80}$Te$_{20}$ alloy thin films and oriented growth of crystallites[J]. Physical Review B, 1988,37(2):720.
[22] Diniz A, Kiely C. Crystallisation of indium-tin-oxide (ITO) thin films[J]. Renewable Energy, 2004,29(13):2037-2051.
[23] Chen H, Li K, Yang M, et al. Effect of electron beam irradiation in TEM on the microstructure and composition of nanoprecipitates in Al-Mg-Si alloys[J]. Micron, 2019,116:116-123.
[24] Zhou X, Wang G, Zhang L, et al. Enhanced thermoelectric properties of Ba-filled skutterudites by grain size reduction and Ag nanoparticle inclusion[J]. Journal of Materials Chemistry, 2012,22(7):2958-2964.
[25] Hu L, Wu H, Zhu T, et al. Tuning multiscale microstructures to enhance thermoelectric performance of n-type Bismuth-Telluride-based solid solutions[J]. Advanced Energy Materials, 2015,5(17):1500411.
Options
Outlines

/

〈 〉