中文

Journal of Shanghai University >

2019 , Vol. 25 >Issue 4: 502 - 515

DOI: https://doi.org/10.12066/j.issn.1007-2861.2049

Research Articles

Failure behavior for composite bolted joints

Expand
  • 1. School of Automotive Studies, Tongji University, Shanghai 200092, China
    2. School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200444, China
    3. School of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
    4. Department of Industrial Engineering, Xi'an Jiaotong-Liverpool University, Suzhou 215123, Jiangsu, China

Received date: 2018-03-20

  Online published: 2019-09-04

Fold

Abstract

Bolt joints are the most commonly used connections, but they are often the weakest part in those structures. Therefore, to ensure the safety of aircraft structures, evaluating failure load in composite bolted joint is necessary. Based on Hashin failure criteria, a 3D finite element (FE) model of a composite single-lap countersunk bolted joint was developed to study the damage effects. Numerical analysis was conducted by employing UMAT which was developed from Fortran Language and implemented via Abaqus. Based on the parametric studies of coefficient of friction, bolt-hole clearance and bolt load, the impact of parameters on the failure load of composite bolted joint was analyzed, and numerical results were compared with experimental results, to provide the reference for the installation and design of composite bolted joints.

Key words： bolted joints; composite materials; failure load; Hashin failure criteria

Cite this article

Xuhui TANG, Shunqi ZHANG, Shenshun YING, Min CHEN . Failure behavior for composite bolted joints[J]. Journal of Shanghai University, 2019 , 25(4) : 502 -515 . DOI: 10.12066/j.issn.1007-2861.2049

References

[1] Tsai S W . A general theory of strength for anisotropic materials[J]. Journal of Composite Materials, 1971,5(1):58-80.
[2] Hill R . A theory of the yielding and plastic flow of anisotropic materials[J]. Proceedings of the Royal Society of London, 1948,193(1033):281-297.
[3] Hoffman O . The brittle strength of orthotropic materials[J]. Journal of Composite Materials, 1967,1(2):200-206.
[4] Hashin Z . Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980,47(2):329-334.
[5] McCarthy M A, Lawlor V P, Stanley W F , et al. Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints[J]. Composites Science and Technology, 2002,62(10):1415-1431.
[6] Qin T, Zhao L, Zhang J , et al. Fastener effects on mechanical behaviors of double-lap composite joints[J]. Composite Structures, 2013,100(5):413-423.
[7] Chen W H, Lee S S, Yeh J T . Three-dimensional contact stress analysis of a composite laminate with bolted joint[J]. Composite Structures, 1995,30(3):287-297.
[8] McCarthy C T . Experiences with modeling friction in composite bolted joints[J]. Journal of Composite Materials, 2005,39(21):1881-1908.
[9] Chishti M, Wang C H, Thomson R S , et al. Experimental investigation of damage progression and strength of countersunk composite joints[J]. Composite Structures, 2012,94(2):865-873.
[10] Santiuste C, Barbero E, Miguelez M H , et al. Computational analysis of temperature effect in composite bolted joints for aeronautical applications[J]. Journal of Reinforced Plastics and Composites, 2011,30(1):3-11.
[11] 刘斌, 赵亮, 徐红炉 . 基于 Hashin 失效准则的复合材料螺栓连接损伤破坏研究[J]. 科学技术与工程, 2012,12(8):1740-1744.
[12] 黄学优 . 复合材料螺栓连接接头失效行为研究[D]. 太原: 中北大学, 2016.
[13] 周松 . 复合材料螺栓连接渐进损伤的实验及数值分析[D]. 哈尔滨: 哈尔滨工程大学, 2013.
[14] 朱红红 . 复合材料螺栓连接接头失效分析与强度预测[D]. 郑州: 郑州大学, 2012.
[15] Camanho P P . A progressive damage model for mechanically fastened joints in composite laminates[J]. Journal of Composite Materials, 1999,33(24):2248-2280.
[16] Willis B M . Applying finite element analysis with a focus on tensile damage modeling of carbon fiber reinforced polymer laminates [D]. Columbus, Ohio: The Ohio State University, 2013.
[17] Riccio A . Effects of geometrical and material features on damage onset and propagation in single-lap bolted composite joints under tensile load: part Ⅱ-numberical studies[J]. Journal of Composite Materials, 2005,39(23):2091-2112.
[18] Riccio A . Effects of geometrical and material features on damage onset and propagation in single-lap bolted composite joints under tensile load: part Ⅰ-experimental studies[J]. Journal of Composite Materials, 2005,39(23):2071-2090.
Options
Outlines

/

〈 〉