| [1] 黄淑菊. 金属腐蚀与防护[M]. 西安: 西安交通大学出版社, 1988: 135-136.[2] 李挺芳. 腐蚀监测方法综述(1) [J]. 石油化工腐蚀与防护, 1993(2): 014.[3] 吴荫顺. 腐蚀试验方法与防腐蚀检测技术[M]. 北京: 化学工业出版社, 1996.[4] 肖纪美. 腐蚀总论: 材料的腐蚀及其控制方法[M]. 北京: 化学工业出版社, 1994.[5] 黄永昌. 金属腐蚀与防护原理[M]. 上海: 上海交通大学出版社, 1989.[6] 郭育霞, 贡金鑫. 盐水条件下不同混凝土中钢筋的快速腐蚀行为的研究[J]. 腐蚀科学技术, 2007, 19(3): 218-220.[7] 安丽娟, 李庆芬, 赵永韬. 40Cr钢在海水中抗应力腐蚀的快速评价[J]. 材料保护, 2011, 44(1): 19-21.[8] 张青红, 辛剑. 亚硝酸钙对混凝土结构中钢筋氯腐蚀的缓蚀作用[J]. 材料保护, 1999, 32(11): 7-10.[9] Saxena A, Singh R R K．Slow strain rate testing for monitoring cracking of mild steels for vessels and pipes for processing using caustic solutions [J]. International Journal of Pressure Vessels and Piping, 2006, 83(5): 399-404．[10] Li S Y, Jung S, Park K, et al. Kinetic study on corrosion of steel in soil environments using electrical resistance sensor technique [J]. Materials Chemistry and Physics, 2007, 103(1): 9-13.[11] Iyon S B, Fray D J. Electrochemical detection of hydrogen using a solid-state probe [J]. Solid State Ionics, 1983, 9(10): 1295-1296.[12] Bautista A, Huet F．Noise resistance applied to corrosion measurements-Ⅳ. Asymmetric coated electrodes [J]. Journal of Electrochemical Society, 1999, 146(5): 1730-1736.[13] Morris D R, Wan L. A solid-state potentialmetric sensor for monitoring hydrogen in commercial pipeline steel [J]. Corrosion, 1995, 51(4): 301-311.[14] Cooper G L. Corrosion monitoring in industrial plants using nondestructive testing and electrochemical methods [C]//The Symposium on Nondestructive Testing and Electrochemical Methods of Monitoring Corrosion in Industrial Plants. 1986: 237-250.[15] Denzine A F, Reading M S. A critical comparison of corrosion monitoring techniques used in industrial applications [C]//NACE International. 1997: 511.[16] Royer R A, Unz R F. Use of electrical resistance probes for studying microbiologically influenced corrosion [J]. Corrosion, 2002, 58(10): 863-870.[17] Cai J P, Lyon S B. A mechanistic study of initial atmospheric corrosion kinetics using electrical resistance sensors [J]. Corrosion Science, 2005, 47(12): 2956-2973.[18] Li S Y, Jung S, Park K, et al. Kinetic study on corrosion of steel in soil environments using electrical resistance sensor technique [J]. Materials Chemistry and Physics, 2007, 103(1): 9-13.[19] Li S Y, Kim Y G, Jung S, et al. Application of steel thin film electrical resistance sensor for in situ corrosion monitoring [J]. Sensors and Actuators B: Chemical, 2007, 120(2): 368-377.[20] Li S Y, Kim Y G, Kho Y T, et al. Statistical approach to corrosion under disbonded coating on cathodically protected line pipe steel [J]. Corrosion, 2004, 60(11): 1058-1071.[21] Singh R, Dahotre N B. Corrosion degradation and prevention by surface modification of biometallic materials [J]. Journal of Materials Science: Materials in Medicine, 2007, 18(5): 725-751.[22] Bano A S, Qazi J I. Isolation and optimization of mild steel corroding bacteria from corrosion influenced soil samples [J]. Proc Pak Congr Zool, 2007, 27: 47-66.[23] 狄欧, 李果, 袁迎曙. 电化学检测技术在混凝土内钢筋腐蚀研究中的应用现状与展望[J]. 混凝土, 2005, 2: 20-23.[24] Mansfeld F, Jeanjaquet S, Roe D K. Barnacle electrode measurement system for hydrogen in steels [J]. Materials Performance, 1982, 2(2): 35-38.[25] 王庆军, 王德会. 电阻探针式腐蚀监测仪在塔顶系统的应用[J]. 石油化工腐蚀与防护, 2003, 20(5): 41-44.[26] 郑立群, 张蔚, 台闯, 等, 高温腐蚀监测电阻探针和测试仪的研制及应用[J]. 石油化工腐蚀与防护, 2002, 19(5): 50-53.[27] 柏任流, 董泽华, 郭兴蓬, 等. 基于温度补偿的电阻探针腐蚀检测原理的研究[J]. 腐蚀科学与防护技术, 2007, 19(5): 338-341.[28] Royer R A, Unz R F. Use of electrical resistance probes for studying microbiologically influenced corrosion [J]. Corrosion, 2002, 58(10): 863-870.[29] Denzine A F. Improved rapid corrosion rate measurement technique for all process environments [J]. Materials Performance, 1998, 37(1): 35-41.[30] 郑立群. 石油化工工业防腐检测技术的最新发展[J]. 石油化工腐蚀与防护, 2005, 22(1): 11-18.[31] 邹国军, 陈澜涛, 郑弃非. 用电阻探针法研究水环境中钢筋混凝土的腐蚀行为[J]. 材料保护, 2007, 40(4): 11-13.[32] 宋诗哲, 雒娅楠, 金威贤. 海水腐蚀试验站碳钢低合金钢全浸试片的现场腐蚀检测[J]. 中国腐蚀与防护学报, 2007, 27(6): 321-325.[33] 刘丽宏, 齐慧滨, 卢燕平. 耐大气腐蚀钢的研究概况[J]. 腐蚀科学与防护技术, 2003, 15(2): 86-89.[34] 聂向晖, 杜翠薇, 李晓刚. 温度对Q235钢在大港模拟溶液中腐蚀行为的影响[J]. 腐蚀与防护, 2008, 29(4): 171-174. |
