[1] |
Barak M M, Currey J D, Weiner S , et al. Are tensile and compressive Young's moduli of compact bone different[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2009,2(1):51-60.
|
[2] |
Tsoukleri G, Parthenios J, Papagelis K , et al. Subjecting a graphene monolayer to tension and compression[J]. Small, 2009,5(21):2397-2402.
|
[3] |
杨海天, 朱应利 . 光滑函数法求解拉压不同弹性模量问题[J]. 计算力学学报, 2006,23(1):19-23.
|
[4] |
Yao W J, Ye Z M . Analytical solution for bending beam subject to lateral force with different modulus[J]. Applied Mathematics and Mechanics, 2004,25(10):1107-1117.
|
[5] |
Yao W J, Ye Z M . Analytical solution of bending-compression column using different tension-compression modulus[J]. Applied Mathematics and Mechanics, 2004,25(9):983-993.
|
[6] |
Yao W J, Ye Z M . Internal forces for statically indeterminate structures having different moduli[J]. Journal of Engineering Mechanics, 2006,132(7):739-746.
|
[7] |
Yao W J, Zhang C H, Jiang X F . Nonlinear mechanical behavior of combined members with different moduli[J]. International Journal of Nonlinear Sciences and Numerical Simulation, 2006,7(2):233-238.
|
[8] |
Yao W J, Liu J K . Temperature stress for bending beam with different modulus under different constraints[J]. International Journal of Multidiscipline Modeling in Materials and Structures, 2014,10(2):163-175.
|
[9] |
Leal A A, Deitzel J M, Gillespie J W . Compressive strength analysis for high performance fibers with different modulus in tension and compression[J]. Journal of Composite Materials, 2009,43(6):661-674.
|
[10] |
He X T, Zheng Z L, Sun J Y . Convergence analysis of a finite element method based on different moduli in tension and compression[J]. International Journal of Solids & Structures, 2009,46(20):3734-3740.
|
[11] |
He X T . Application of the Kirchhoff hypojournal to bending thin plates with different moduli in tension and compression[J]. Journal of Mechanics of Materials & Structures, 2010,5(5):755-769.
|
[12] |
黄翀, 吴晓, 杨立军 . 线性分布载荷作用下双模量圆板的计算分析[J]. 机械强度, 2012,34(1):64-68.
|
[13] |
吴晓, 赵均海, 黄志刚 . 双模量材料圆板热弯曲及热屈曲的研究[J]. 应用力学学报, 2015,32(4):549-555.
|
[14] |
吴晓, 杨立军, 黄翀 , 等. 双模量矩形板的大挠度弯曲计算分析[J]. 工程力学, 2010,27(1):17-22.
|
[15] |
吴晓, 杨立军, 黄翀 . 不同模量面板夹心泡沫铝板大挠度弯曲[J]. 西安建筑科技大学学报(自然科学版), 2014,46(2):181-186.
|
[16] |
Iwase T, Hirashima K . Dynamic response analysis of thick rectangular beam mode of bimodulus material.[J]. Transactions of the Japan Society of Mechanical Engineers Series A, 1997,63(608):765-773.
|
[17] |
赵荣国, 徐友钜, 陈忠富 , 等. 不同拉压特性结构振动分析的双线性近似方法[J]. 振动与冲击, 2005,24(1):4-7.
|
[18] |
刘相斌, 宋宏伟 . 不同模量弯曲梁的自由振动[J]. 大连民族学院学报, 2007,40(5):104-107.
|
[19] |
王铭慧, 赵永刚, 王康建 , 等. 拉压弹性模量不等材料简支梁的线性振动问题[J]. 甘肃科学学报, 2014,26(5):10-13.
|