以甲基丙烯酸丁酯、苯乙烯、八甲基环四硅氧烷(D4)为分散相, 偶氮二异丁腈(azobisisobutyronitrile, AIBN)为引发剂, 通过超浓乳液聚合制备具有一定核-壳结构的复合高分子材料. 采用透射电镜(transmission electron microscopy, TEM)观测了材料的形态特征, 并表征了共聚物的吸水率和接触角. 结果表明, 所制备的超浓乳液体系具有良好的稳定性, 聚合材料耐水性较好.
This paper presents the core-shell composite polymer produced by concentrated emulsion, whose continuous phase contains styrene (St), butyl methacrylate (BMA), etamethyltetraeyelosiloxane (D4), and azobisisobutyronitrile (AIBN) as initiator. The products are characterized by transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The results show that concentrated emulsion system has good stability and water resistance of the polymer has been greatly improved.
[1] 阚成友, 孔祥正, 袁青, 等. 有机硅改性丙烯酸酯聚合物研究进展[J]. 高分子材料科学与工程, 2000, 16(4):1-4.
[2] 郭文录, 吕秀波, 国晓军, 等. 有机硅改性苯丙乳液的合成与表征[J]. 应用化工, 2009, 38(12): 1780-1784.
[3] 甘孟瑜, 李秋, 王蘅. 有机硅改性丙烯酸酯共聚乳液的合成及性能[J]. 中国涂料, 2005, 20(6): 19-23.
[4] Zhang H T, Chen M, L¨u R. Concentrated emulsion copolymerization of butyl acrylate and vinyl acetate
initiated by a redox initiator at lower temperature [J]. Journal of Applied Polymer Science, 2004, 91(1): 570-576.
[5] Li H Q, Du Z J, Huang H H. Preparation of a self-compatibility alloy via a seed-graft concentratedemulsion pathway [J]. Journal of Applied Polymer
Science, 2002, 83(13): 2915-2920.
[6] Zhang H T, Tan B, Wang A L, et al. Concentrated emulsion polymerization of methyl methacrylate/butyl acrylate initiated by a redox system [J].
Journal of Applied Polymer Science, 2005, 97(4): 1695-1701.
[7] Wong L L, Ikem V O, Menner A, et al. Macroporous polymers with hierarchical pore structure from emulsion templates stabilised by both particles and
surfactants [J]. Macromol Rapid Commun, 2011, 32(19): 1563-1568.
[8] Dai Q, Wu D Z, Zhang Z C, et al. Preparation of monodisperse poly(methyl methacrylate) particles by radiation-induced dispersion polymerization using
vinyl terminus polysiloxane macromonomer as a polymerizable stabilizer [J]. Polymer, 2003, 44(1): 73-77.
