上海市现代冶金与材料制备重点实验室专栏

脉冲磁场退火对取向硅钢磁性能的影响

展开
  • (上海大学 上海市现代冶金与材料制备重点实验室,上海 200072)

收稿日期: 2010-11-22

  网络出版日期: 2011-02-28

Effect of Pulse Magnetic Field Annealing on Magnetic Properties of Grain-Oriented Silicon Steel

Expand
  • (Shanghai Key Laboratory of Modern Metallurgy & Materials Processing, Shanghai University, Shanghai 200072, China)

Received date: 2010-11-22

  Online published: 2011-02-28

Supported by

国家自然科学基金资助项目(50804028)

摘要

通过对取向硅钢进行脉冲磁场退火实验,发现在相同的退火时间(6.0 min)内,低于1 T的脉冲磁场可以在一定程度上提高取向硅钢的磁感(B8),而高于1 T的脉冲磁场则会使取向硅钢的磁性能急剧恶化.同时发现,脉冲直流电加热方式会使取向硅钢的磁性能恶化.研究表明,脉冲磁场退火有望成为一种调控材料微观结构的有效手段.

本文引用格式

李莉娟,刘立华,夏强强,翟启杰 . 脉冲磁场退火对取向硅钢磁性能的影响[J]. 上海大学学报(自然科学版), 2011 , 17(1) : 35 -38 . DOI: 10.3969j.issn.1007-2861.2011

Abstract

We have carried out experiments of annealing by pulse magnetic field. The results show that a pulse magnetic field with intensity lower than 1 T can promote magnetic induction density (B8) of grain-oriented silicon steel, while the magnetic properties deteriorate sharply when intensity is higher than 1 T. It has also been found that heating by using pulse direct current can cause the magnetic properties to deteriorate, in contrast to the traditional heating using resistance furnace. Our research shows that pulse magnetic field annealing may become an effective method to modify material structures.

文章导航

/