研究论文

一种新的表面张力测定方法——真球气泡法

展开
  • 1. 上海大学 材料科学与工程学院 省部共建高品质特殊钢冶金与制备国家重点实验室, 上海 200444
    2. Sanwa Hydrotech Corporation, Fukuchiyama 620-0853, Japan
    3. Graduate School of Science and Engineering, National University Corporation Ehime University, Matsuyama 790-0826, Japan
    4. Kyushu Institute of Technology, Kyushu 804-8550, Japan

收稿日期: 2018-03-29

  网络出版日期: 2020-04-29

A new method for measuring surface tension—real sphere bubble method

Expand
  • 1. State Key Laboratory of Advanced Special Steel, School of Materials Science and Engineering, Shanghai University, Shanghai 200444
    2. Sanwa Hydrotech Corporation, Fukuchiyama 620-0853, Japan
    3. Graduate School of Science and Engineering, National University Corporation Ehime University, Matsuyama 790-0826, Japan
    4. Kyushu Institute of Technology, Kyushu 804-8550, Japan

Received date: 2018-03-29

  Online published: 2020-04-29

摘要

设计了一个新的表面张力测定装置,通过实时测定液膜气泡的半径及其内外压差来获得被测液体的表面张力.该测定液体表面张力的方法简称为真球气泡法(real sphere bubblemethod, RSBM). 对十二烷基硫酸钠(sodium dodecyl sulfate,SDS)溶液的表面张力进行了测定, 结果与文献值吻合,且测定装置的绝对精度为98.2%.通过检测到的液膜气泡突然长大所需要的最大压差值Δ Pm及其表面积随时间的变化过程, 定量分析了ΔPm与溶液起泡难易程度及气泡大小的关系.

本文引用格式

郭杰, 余仲达, 郑少波, RYO Moriyasu, HIROMICHI Takebe, KUSUHIRO Mukai . 一种新的表面张力测定方法——真球气泡法[J]. 上海大学学报(自然科学版), 2020 , 26(2) : 244 -254 . DOI: 10.12066/j.issn.1007-2861.2024

Abstract

A new device for measuring surface tension was designed, and the surface tension of liquid was calculated through real-time measurement of the radius and the differential pressure between inside and outside of the liquid bubble. This new method of measuring liquid surface tension is known as real sphere bubble method (RSBM). In this paper, the surface tension of sodium dodecyl sulfate (SDS) solutions is measured. The results are consistent with the literature. The absolute accuracy of this apparatus is 98.2%. In addition, ΔPm is the maximum differential pressure required for rapid growth of bubbles formed by SDS solutions. The difficult level of foaming a liquid bubble and the size of a bubble is quantitatively analyzed by detecting ΔPm for sudden bubble growth and the change of surface area over time.

参考文献

[1] Zhang L, Aoki J, Thomas B G . Inclusion removal by bubble flotation in a continuous casting mold[J]. Metallurgical and Materials Transactions B, 2006,37(3):361-379.
[2] 邓丽君, 曹亦俊, 王利军 . 起泡剂溶液的表面张力对气泡尺寸的影响[J]. 中国科技论文, 2014,9(12):1340-1343.
[3] Mukai K, Matsushita T, Seetharaman S . A novel experimental method for simultaneous measurements of surface tension and surface dilatational viscosity of liquid[J]. CAMP-ISIJ, 2010,23:157.
[4] Moriyasu R, Takebe H, Yu Z D, et al. Measurement of surface tension of surfactant aqueous solution[C]// MMIJ Annual Meeting, 2013.
[5] 余仲达 . 表面张力和表面面积粘性测定装置: 中国, 201410327619.3[P]. 2014 -11-05.
[6] Shu O . Surface tension[M]. Tokyo: Kyoritsu Shuppan, 1980: 16-20.
[7] Rosen M J . Surfactants and interfacial phenomena[M]. New York: John Wiley & Sons, 1978: 123-126.
[8] IAPWS. The international association for the properties of water and steam[R]. Moscow: IAPWS, 2014: 1-6.
[9] Mysels K J . Surface tension of solutions of pure sodium dodecyl sulfate[J]. Langmuir, 1986,2:423-428.
[10] Nobuo K . Surfactant analysis and test method[M]. Tokyo: Light Industry, 1988: 57-61.
[11] Belton G R . Interfacial reaction kinetics in the decarburization of liquid iron by carbondioxide[J]. Metall, 1976,7B:235-244.
[12] 代伟, 徐平川, 陈太红 , 等. 液体表面张力系数实验装置的改进[J]. 大学物理, 2011,9:38-40.
[13] 郭瑞 . 表面张力测量方法综述[J]. 计量与测试技术, 2009,36(4):62-64.
[14] 王常珍 . 冶金物理化学研究方法 [M]. 北京: 冶金工业出版社, 1992: 287-295.
[15] PWilhelmy L. Ueber die abh$\ddot{a}$ngigkeit der capillarit$\ddot{a}$ts-constanten des alkohols von substanz und gestalt des benetzten festen k$\ddot{o}$rpers[J]. Ann Phys, 1863,199:177-217.
[16] Tate T. On the magnitude of a drop of liquid formed under different circumstances[J]. Phil Mag, 1864,27:176-180.
[17] Parreira H C . The surface chemistry of alkyl phosphoric acids[J]. J Colloid Sci, 1965,20:742-754.
[18] Lecomte P . A new apparatus for measuring surface tension[J]. J Gen Physiol, 1919,1:521-524.
[19] Harkins W D, Jordan H F . A method for the determination of surface and interfacial tension from the maximum pull on a ring[J]. J Amer Chem Soc, 1930,52:1751-1772.
[20] Bashforth F, Adams J C. An attempt to test the theories of capillary action [M]. Cambridge: Cambridge University Press, 1883:13-17.
[21] Porter A W . The calculation of surface tension from experiment: Part I. Sessile drops[J]. Phil Mag, 1933,15:163-170.
[22] Smolders C S, Duyvis E M . Contact angles; wetting and de-wetting of mercury: Part I. A critical examination of surface tension measurement by the sessile drop method[J]. Rec Trav Chim, 1961,80:635-649.
[23] Maru K K . Handbook of chemistry[M]. Tokyo: The Chemical Society of Japan, 1975: 30-35.
文章导航

/