研究论文

石墨烯/氧化锆复合材料的分散液工艺优化及润湿性能

展开
  • 上海大学 复合材料研究中心, 上海 200444

收稿日期: 2018-03-30

  网络出版日期: 2020-03-22

基金资助

上海市教委科研创新资助项目(K.10-0406-13-002)

Optimization parameter of the graphene dispersion and the wettability of graphene/ZrO$_2$ ceramic composites

Expand
  • Research Center of Composite Materials, Shanghai University, Shanghai 200444, China

Received date: 2018-03-30

  Online published: 2020-03-22

摘要

将石墨烯分散液浸渍到氧化锆基体中,利用微波烧结法制备石墨烯/氧化锆陶瓷复合材料,提高了氧化锆陶瓷的润湿性. 首先,通过优化球磨机的工艺参数(球料比、转速、研磨时间), 制备出粒径为200.3 nm 的石墨烯分散液, 然后通过X射线衍射仪(X-ray diffraction, XRD)、Raman光谱仪、透射电子显微镜(transmission electron microscope, TEM)分析了石墨烯的微观结构, 最后分析了石墨烯/氧化锆陶瓷复合材料的润湿性. 结果表明, 石墨烯分散液能够长时间存放, 且具备较好的单层或少层片状结构, 添加石墨烯能够明显提高氧化锆陶瓷的润湿性, 使氧化锆陶瓷润湿角减小, 表面能增加, 润湿性能变好.

本文引用格式

邹虹荣, 石磊, 林成辉, 张亚萍, 刘立起 . 石墨烯/氧化锆复合材料的分散液工艺优化及润湿性能[J]. 上海大学学报(自然科学版), 2020 , 26(1) : 102 -112 . DOI: 10.12066/j.issn.1007-2861.2021

Abstract

The wettability of ZrO2 ceramic was improved in the graphene/ZrO2 ceramic composites fabricated by impregnating graphene dispersion into ZrO2 ceramic sintered by micro wave. Firstly, the graphene dispersion was fabricated by ball milling, and the size of graphene with 200.3 nm was obtained after optimizing the process parameter of the ratio of ball, speed, time. Then, the structure of graphene was analyzed through X-ray diffraction (XRD), Raman spectrometer and transmission electron microscope (TEM), and the wettability of ceramic was also investigated. The results showed that the graphene dispersion remained steady for a long time with keeping a few layers. When adding the graphene to the ZrO2 ceramic, the wettability of ZrO2 ceramic was obviously improved because of its lower contact angle and higher surface energy.

参考文献

[1] Ramesh S, Meenaloshini S, Tan C Y , et al. Effect of manganese oxide on the sintered properties and low temperature degradation of Y-TZP ceramics[J]. Ceram Int, 2008,34(7):1603-1608.
[2] Manicone P F, Iommetti P R, Raffaelli L . An overview of zirconia ceramics: basic properties and clinical applications[J]. Journal of Dentistry, 2007,35(11):819-826.
[3] Lee S Y, Kim H, McIntyre P C , et al. Atomic layer deposition of ZrO2 on W for metal-insulator-metal capacitor application[J]. Appl Phys Lett, 2003,82(17):2874-2876.
[4] Durov A V, Naidich Y V, Kostyuk B D . Investigation of interaction of metal melts and zirconia[J]. Journal of Materials Science, 2005,40(9/10):2173-2178.
[5] 刘桂武, 杨刚宾, 乔冠军 , 等. 氧化锆陶瓷润湿及钎焊的研究进展[J]. 稀有金属材料与工程, 2009,38:406-410.
[5] Liu G W, Yang G B, Qiao G J , et al. Research progress on brazing and wetting of zirconia ceramic[J]. Rare Metal Materials and Engineering, 2009,38:406-410.
[6] Castro N A H, Guinea F, Peres N M R , et al. The electronic properties of graphene[J]. Reviews of Modern Physics, 2009,81(1):109.
[7] Nair R R, Blake P, Grigorenko A N , et al. Fine structure constant defines visual transparency of graphene[J]. Science, 2008,320(5881):1308.
[8] Johnson D W, Dobson B P, Coleman K S . A manufacturing perspective on graphene dispersions[J]. Current Opinion in Colloid & Interface Science, 2015,20(5):367-382.
[9] Yang J, Yang X, Li Y . Molecular simulation perspective of liquid-phase exfoliation, dispersion, and stabilization for graphene[J]. Current Opinion in Colloid & Interface Science, 2015,20(5/6):339-345.
[10] 苏佳楠 . 放电等离子烧结石墨烯增韧氧化锆陶瓷基复合材料力学性能研究[D]. 苏州: 苏州大学, 2015.
[10] Su J N . The mechanical properties of graphene nanoplatelets reinforced zirconia composite[D]. Suzhou: Soochow University, 2015.
[11] Breitwieser R, Hu Y C, Chao Y C , et al. Flipping nanoscale ripples of free-standing graphene using a scanning tunneling microscope tip[J]. Carbon, 2014,77:236-243.
[12] Bai M M, Chen J F, Wu W , et al. Preparation of stable aqueous dispersion of edge-oxidized graphene and its transparent conductive films[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2016,490:59-66.
[13] Lin C, Yang L L, Ouyang L Z , et al. A new method for few-layer graphene preparation via plasma-assisted ball milling[J]. Journal of Alloys and Compounds, 2017,728:578-584.
[14] Solà R, Sutcliffe O B, Banks C E , et al. Ball mill and microwave assisted synthetic routes to fluoxetine[J]. Sustainable Chemistry and Pharmacy, 2017,5:14-21.
[15] Al-Sherbini A S, Bakr M, Ghoneim I , et al. Exfoliation of graphene sheets via high energy wet milling of graphite in 2-ethylhexanol and kerosene[J]. Journal of Advanced Research, 2017,8(3):209-215.
[16] Shen T D, Ge W Q, Wang K Y , et al. Structural disorder and phase transformation in graphite produced by ball milling[J]. Nanostructured Materials, 1996,7(4):393-399.
[17] Fan X L, Chang D W, Chen X L , et al. Functionalized graphene nanoplatelets from ball milling for energy applications[J]. Current Opinion in Chemical Engineering, 2016,11:52-58.
[18] Zhao W F, Wu F R, Wu H , et al. Preparation of colloidal dispersions of graphene sheets in organic solvents by using ball milling[J]. Journal of Nanomaterials, 2010,2010:1-5.
[19] 韩复兴, 李小雷 . 再探湿法球磨工艺的节能途径[J]. 佛山陶瓷, 2008,18(5):8-11.
[20] Ferrari A C, Meyer J C, Scardaci V , et al. Raman spectrum of graphene and graphene layers[J]. Physical Review Letters, 2006,97(18):187401.
文章导航

/