[1] Kim W, Bae J W, Cho I D, et a1. Thermally conductive EMC (epoxy molding compound) for microelectronic encapsulation [J]. Polymer Engineering and Science, 1999, 39(4): 756-766.[2] Lin C H, Huang J M, Wang C S. Synthesis, characterization and properties of tetramethyl stilbene-based epoxy resins for electronic encapsulation [J]. Polymer, 2002, 43(10): 2959-2967.[3] 张续柱, 王严杰. 改性环氧覆铜板高电性能的研究[J]. 纤维复合材料, 2002, 19(1): 33-35.[4] Singha S, Thomas M J. Dielectric properties of epoxy nanocomposites [J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2008, 15(1): 12-23.[5] 孟季茹, 梁国正, 何洋, 等. 聚苯醚改性环氧树脂基覆铜板的研制[J]. 复合材料学报, 2003, 20(1): 74-78.[6] 李爱英, 常杰云. 聚苯醚改性的研究进展与应用[J]. 工程塑料应用, 2011, 39(2): 96-99.[7] Yoshiyuki I, Anthony J R. Processing of poly(2,6-dimethyl-1,4-phenylene ether) with epoxy resin. 1. reaction-induced phase separation [J]. Macromolecules, 2000, 33(1): 158-166.[8] 万勇军. 覆铜板用热固性聚苯醚[J]. 热固性树脂, 2001, 16(4): 25-28.[9] Nunoshige J, Akahoshi H, Shibasaki Y. et a1. Efficient oxidative coupling polymerization for synthesis of thermosetting poly (phenylene ether) copolymer with a low dielectric loss [J]. Journal of Polymer Science Part A: Polymer Chemistry, 2008, 46(15): 5278-5282.[10] Fukuhara T, Shibasaki Y, Ando S, et a1. Synthesis of thermosetting poly (phenylene ether) containing allyl groups [J]. Polymer, 2004, 45(3): 843-847.[11] 吕键勇, 孟焱, 何立凡, 等. 超支化聚苯醚对双酚A型环氧树脂的低介电改性[J]. 北京化工大学学报, 2013, 40(4): 41-45.[12] Huang P Z, Gu A J, Liang G Z, et al. Curing behavior and dielectric properties of hyperbranched poly (phenylene oxide)/cyanate ester resins [J]. Journal of Applied Polymer Science,2011, 121: 2113-2122.[13] 吴永胜, 余若冰, 朱长进, 等. 硅烷改性芳基乙炔固化物的耐热性能[J]. 上海大学学报: 自然科学版, 2013, 19(6): 562-566.[14] 周园, 徐庆玉, 李翔, 等. 聚苯醚的改性及应用[C]// 第十二届中国覆铜板技术市场研讨会. 2011: 221-224.[15] Wu S J, Lin T K, Shyu S S. Cure behavior, morphology, and mechanical properties of the melt blends of epoxy with polyphenylene oxide [J]. Journal of Applied Polymer Science, 2000, 75(1): 26-34.[16] 史宜望, 奚慧兰, 龚德昌, 等. KOH催化环氧树脂与丙烯酸反应的动力学研究[J]. 上海大学学报: 自然科学版, 2003, 9(1): 51-54.[17] 田勇, 王秀芳, 杨卓如. PPE/EP体系的介电性能和耐溶剂性研究[J]. 塑料科技, 2007, 35(8): 66-69.[18] 田勇, 皮丕辉, 文秀芳, 等. 高性能覆铜板用聚苯醚/环氧树脂体系[J]. 塑料科技, 2006, 34(2): 1-4.[19] 苏民社, 刘军, 王玉红. 聚苯醚/环氧玻璃布覆铜板的研制[J]. 绝缘材料, 2002(4): 13-15. |