收稿日期: 2017-03-29
网络出版日期: 2018-03-05
基金资助
国家自然科学青年基金资助项目(51502328)
Fabrication and biological properties of micro/nano hybrid structured TiO2 coatings
Received date: 2017-03-29
Online published: 2018-03-05
表面形貌是影响骨植入体稳定性的重要因素,仿生微/纳多级结构表面能加快早期细胞响应,加速植入体与骨组织间的整合, 并改善其长期稳定性.以锐钛矿相二氧化钛悬浮液为喂料, 采用液相感应等离子喷涂(induction suspension plasma spraying,ISPS)技术制备微/纳多级结构TiO$_{2}$涂层,并对其细胞相容性进行了研究. 扫描透射电子显微镜(scanning transmission electron microscopy, SEM)观察结果表明,通过对进料速率的调控, 可制备典型微/纳多级结构的TiO$_{2}$涂层,气孔率随进料速率的增大而增大. X射线衍射(X-ray diffraction,XRD)结果表明, 涂层以金红石相为主, 并含少量锐钛矿相,金红石相含量随进料速率的增大而降低,这可能与等离子体喷涂的高温过程有关,锐钛矿相二氧化钛在此过程中发生相变, 产生了更为稳定的金红石相.通过体外细胞相容性检测发现,ISPS制备的微/纳多级结构TiO$_{2}$涂层具有较高的蛋白吸附水平,成骨细胞在其表面能较好铺展, 碱性磷酸酶(alkaline phosphatase,ALP)活性、矿化等基因表达均高于大气等离子喷涂涂层和光滑钛表面.
顾静萍, 谢有桃, 黄利平, 贺延昌, 赵君, 郑学斌, 李红, 孙晋良 . 微/纳多级结构TiO2涂层的制备及生物学性能[J]. 上海大学学报(自然科学版), 2018 , 24(1) : 44 -55 . DOI: 10.12066/j.issn.1007-2861.1921
Micro/nano hybrid structured surface can improve their capability of encouraging early cell responses and rapid bone in-growth. The micro/nano hybrid structured TiO$_{2}$ coatings were prepared by induction suspension plasma spraying (ISPS) using anatase TiO$_{2}$ suspension as a feedstock. Their osteogenesis related cell behaviors were studied. Scanning transmission electron microscopy (SEM) results show that the coatings prepared by adjusting feed rate have typical micro/nano hybrid structures. Porosity of the coating increases with the increase of feed rate. The X-ray diffraction (XRD) results show that the coating is mainly composed of rutile with a small amount of anatase, and the content of rutile decreased with the increase of feed rate. This may be related to the high temperature process of plasma spraying, in which the anatase phase is transformed into a more stable rutile phase. The results of in vitro cell compatibility tests show that the micro/nano structured TiO$_{2}$ coatings prepared with ISPS has higher protein adsorption, better osteoblasts spreading and higher expression of alkaline phosphatase (ALP) activity and mineralization than atmospheric plasma sprayed coatings and polished titanium surfaces.
| [1] | Sun L, Berndt C C, Gross K A , et al. Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review[J]. Journal of Biomedical Materials Research, 2001,58(5):570-592. |
| [2] | Guglielmo M, Gulotta C F . Advancing dental implant surface technology from micron to nanotopography[J]. Biomaterials, 2008,29(28):3822-3835. |
| [3] | Shalabi M M, Gortemaker A, Hof M A , et al. Implant surface roughness and bone healing: a systematic review[J]. Journal of Dental Research, 2006,85(6):496-500. |
| [4] | Dan N . Synjournal of hierarchical materials[J]. Trends in Biotechnology, 2000,18(9):370-374. |
| [5] | Buehler M J, Ackbarow T . Nanomechanical strength mechanisms of hierarchical biological materials and tissues[J]. Comput Methods Biomech Biomed Engin, 2008,11(6):595-607. |
| [6] | 郑学斌, 谢有桃, 季珩 , 等. 生物医用钛涂层结构调控与成骨性能研究[J]. 热喷涂技术, 2015,7(4):17-21. |
| [7] | Tan J, Saltzman W M . Biomaterials with hierarchically defined micro- and nano scale structure[J]. Biomaterials, 2004,25(17):3593-3601. |
| [8] | Lim Y J, Oshida Y, Andres C J , et al. Surface characterizations of variously treated titanium materials[J]. Int J Oral Maxillofac Implants, 2001,16(3):333-342. |
| [9] | Gao L, Feng B, Wang J , et al. Micro/nanostructural porous surface on titanium and bioactivity[J]. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2009,89(2):335-341. |
| [10] | Rao A R, Dutta V . Low-temperature synjournal of TiO$_{2}$, nanoparticles and preparation of TiO$_{2}$, thin films by spray deposition[J]. Solar Energy Materials and Solar Cells, 2007,91(12):1075-1080. |
| [11] | 刘宣勇, 丁传贤 . 等离子体喷涂生物陶瓷涂层[J]. 硅酸盐学报, 2007,35:34-42. |
| [12] | Boulos M I . RF induction plasma spraying: state-of-the-art review[J]. Journal of Thermal Spray Technology, 1992,1(1):33-40. |
| [13] | Gitzhofer F, Jia L . Induction plasma technology applied to materials synjournal for solid oxide fuel cells[J]. International Journal of Applied Ceramic Technology, 2008,5(6):537-547. |
| [14] | Yuan J, Zhan Q, Lei Q , et al. Fabrication and characterization of hybrid micro/nano-structured hydrophilic titania coatings deposited by suspension flame spraying[J]. Applied Surface Science, 2012,258(17):6672-6678. |
| [15] | Roy M, Bandyopadhyay A, Bose S . Induction plasma sprayed nano hydroxyapatite coatings on titanium for orthopaedic and dental implants[J]. Surface & Coatings Technology, 2011,205(8/9):2785-2792. |
| [16] | Branland N, Meillot E, Fauchais P , et al. Relationships between microstructure and electrical properties of RF and DC plasma-sprayed titania coatings[J]. Journal of Thermal Spray Technology, 2006,15(1):53-62. |
| [17] | Berger K N, Bertrand G, Filiatre C , et al. Microstructure of plasma-sprayed titania coatings deposited from spray-dried powder[J]. Surface & Coatings Technology, 2003,168(2/3):281-290. |
| [18] | 高濂, 郑珊, 张青红 . 纳米氧化钛光催化材料及应用 [M]. 北京: 化学工业出版社, 2002: 35-57. |
| [19] | Chen C, Wang D, Bao Q , et al. Influence of laser remelting on the microstructure and phases constitution of plasma sprayed hydroxyapatite coatings[J]. Applied Surface Science, 2005,250:98-103. |
| [20] | Qian L, Lin J, Yu M . Parametric study on suspension behavior in an inductively coupled plasma[J]. Journal of Thermal Spray Technology, 2013,22(6):1024-1034. |
| [21] | Balasundaram G, Sato M, Webster T J . Using hydroxyapatite nanoparticles and decreased crystallinity to promote osteoblast adhesion similar to functionalizing with RGD[J]. Biomaterials, 2006,27(14):2798-2805. |
| [22] | Brammer K S, Oh S, Cobb C J , et al. Improved bone-forming functionality on diameter-controlled TiO$_2$ nanotube surface[J]. Acta Biomaterialia, 2009,5(8):3215-3223. |
| [23] | Bueno R B, Adachi P, Castroraucci L M , et al. Oxidative nanopatterning of titanium surfaces promotes production and extracellular accumulation of osteopontin[J]. Brazilian Dental Journal, 2011,22(3):179-184. |
/
| 〈 |
|
〉 |
